74LVQ373MTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LVQ373MTR is a low-voltage 8-bit buffer/line driver with 3-state output that is designed for improved performance over their TTL relatives. It allows data transmission between two nodes, with one node sending data on the sending lines and the other node receiving the data on the receiving lines. The 74LVQ373MTR is a latch style device, which can be described as a two-input transistor switch. When the inputs are low, the outputs are latched and the signals remain in their current state.

As the name implies, the 74LVQ373MTR is designed to work with low-voltage (3.3V) signals, which helps to improve signal integrity and reduce system power consumption. It is capable of data transmission up to a maximum of 20MHz, which is suitable for high-speed data transmission. With the use of this device, data transfer between two nodes can be carried out over long distances with minimal loss.

Due to its application as a buffer/line driver with 3-state output, the 74LVQ373MTR is often used for transceiving data between two nodes in a system. It can be used to display address and data buses for microcomputers, for bus-oriented systems, and for low-voltage designs. The 74LVQ373MTR has a toggle switch that allows the device to be used as both an input and output device.

The working principle of the 74LVQ373MTR involves the use of two transistors. When the inputs are low, the upper transistor acts as a switch, allowing current to flow from the power source to the output. If the input is high, the upper transistor is shut off, preventing the current from flowing to the output. The lower transistor acts as a latch and provides the retention for the signal. Therefore, as long as the inputs remain low, the signal remains at its current state.

In order to ensure signal integrity, the 74LVQ373MTR features an internal pull-up transistor and an internal diode clamp circuit. The pull-up resistor prevents signal degradation due to ringing and reduces cross-talk between the two nodes. The diode clamp circuit provides protection against overvoltage caused by accidents such as shorting an output to an input or a power supply.

The 74LVQ373MTR is a popular choice for low-voltage designs due to its low cost and small footprint. With its 8-bit buffer/line driver, low-voltage operation, and data rates up to 20MHz, the 74LVQ373MTR provides an efficient and cost-effective way to transmit data in a variety of applications.

The specific data is subject to PDF, and the above content is for reference