74LVT2952PW-Q100J

Series:	Automotive, AEC-Q100, 74LVT
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Logic Type:	Transceiver, Non-Inverting
Number of Elements:	1
Number of Bits per Element:	8
Input Type:	--
Output Type:	3-State
Current - Output High, Low:	32mA, 64mA
Voltage - Supply:	2.7 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	24-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	24-TSSOP
Base Part Number:	74LVT2952

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionThe 74LVT2952PW-Q100J is a logic device designed to perform a variety of tasks. It is a dual-channel buffer, driver, and receiver that are commonly found in computing, communications, and other electronic device applications. The 74LVT2952PW-Q100J is manufactured by ON Semiconductor and is widely used due to its versatility and robustness.Application Field and Working PrinciplesThe 74LVT2952PW-Q100J is a logic device used in a variety of applications. It is a dual-channel buffer and driver, allowing it to be used in applications that require high-speed data transfer and buffering. This device can be used in computing, communications, and other electronic device applications, such as digital signal processors, microprocessors, hard drives, and communication interface circuits. Due to its robust design, the 74LVT2952PW-Q100J is resistant to ESD up to 2000V. The working principle of the 74LVT2952PW-Q100J is relatively straightforward. The device has two input channels, A and B, and two output channels, C and D. Each input channel is connected to its own output channel and is used to drive the logic signals. The device has an enable pin, EN, which can be used to turn the buffer on or off. When EN is low, the device is on and it will buffer the input signals and drive the output signals accordingly. When EN is high, the device is off and no signal will be driven from the output channels. The dual-channel design of the 74LVT2952PW-Q100J makes it versatile and allows for flexibility in applications. The device can be used to drive two separate signals or to drive a single signal that is split between two different signals. It is also possible to use the device in a variety of data bus applications, allowing multiple signals to be driven simultaneously while keeping the signals unidirectional. The 74LVT2952PW-Q100J is designed to run at high speeds, allowing fast data transfers and buffering. The typical rise and fall times of the device are 500ns and 150ns, respectively, making it suitable for high-speed data transfer. It has a maximum data rate of 250 Mb/s and a minimum data pulse width of 50ns. The device also has a low standby current of <1uA in its low-power mode and can draw up to 0.4mA in full-power mode.ConclusionThe 74LVT2952PW-Q100J is a robust and versatile logic device suitable for a wide variety of applications. It is a dual-channel buffer, driver, and receiver and is capable of driving two logic signals or splitting one single signal into two different ones. The device is also ESD resistant and can run at high speeds with a maximum data rate of 250 Mb/s and a minimum data pulse width of 50ns. The low standby current and wide operating range make the 74LVT2952PW-Q100J a reliable and cost-effective solution for various logic-device applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description