74LVTH16374ABX,518

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic flip flops are devices used in digital logic circuits. The 74LVTH16374ABX, 518 is a type of flip flop used to store information in digital circuits. This flip flop is based on the 74LVT16374ABX, 518 technology, which is a combination of two-input and four-output register technology. It is a CMOS latch that has two stable states, the set (1) and reset (0) states. It is triggered by level changes at the two input terminals, and exists in either one of two states in which it will remain until the inputs change. It can be used in applications such as data storage, data synchronization and clock distribution.

The 74LVTH16374ABX, 518 can be used in three different configurations, depending on the application. They are the negative any-edge, transparent low-level, and the transparent high-level. In the negative any-edge configuration, the flip flop is triggered when the input goes lower than the reference level, regardless of the input\'s level prior to the application of the pulse. In the transparent low-level configuration, the output data is the same as the input data - that is, the output tracks the input until the reference level has been exceeded. When this occurs, the data is clocked and is then stored. The third, transparent high-level configuration, is similar except the clock is applied when the input exceeds the reference level.

The 74LVTH16374ABX, 518 can be used in a wide range of applications. It can be used to store memory and data, to synchronize digital data, or to distribute a clock signal. It is also suitable for use in low-power, high-frequency and radiation-shielded systems. It is also well suited for use as a single-edge triggered device, and can be used as a complement of other logic devices.

The 74LVTH16374ABX, 518 operates using CMOS technology, making it very low in power consumption. Its operating voltage is typically from 2.7 to 3.6 volts, and its maximum di/dt and dV/dt protection space is 4.50V/ns and 1250.V/ns respectively. This device has a typical rise time of 190ns and a typical power-off time of 200ns. Its input capacitance is 2pF, and its output capacitance is 0.1pF.

In summary, the 74LVTH16374ABX, 518 is a logic flip flop used in digital systems to store, synchronize and distribute data or clock signals. It uses CMOS technology and is widely used in applications ranging from data storage and synchronization to clock distribution. Its low-power consumption and excellent performance make it a reliable and widely used device in digital circuits.

The specific data is subject to PDF, and the above content is for reference