74VHCV541FT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74VHCV541FT Application Field and Working Principle

As a buffer, driver, receiver, or transceiver, the 74VHCV541FT has a variety of applications in a range of technologies and industries. For example, this device may be found in applications related to automotive, industrial, and communication systems. Additionally, this device may be used in audio, video, and data processing.

The 74VHCV541FT device is a single-ended non-inverting buffer, driver, receiver, or transceiver that is optimized for very high speed operation. It is composed of four separate buffers, each with two output buffers, one inverting and one non-inverting. The devices also has two active low enable pins - 'EN L' and 'EN H' - and two enable input pins - 'IEN L' and 'IEN H'. These enable pins can be used to control the buffer, driver, receiver, or transceiver. The output buffers can support an output logic voltage of between 0 and 5.5 V when supplying an output current of 24 mA.

74VHCV541FT Working Principle

The 74VHCV541FT works in one of four modes, which are determined by the logical states of the enable pins.

When both enable pins are in a low logic state, all of the buffers are disabled and the output levels of the receiver are pulled to their space (ground) level. This is referred to as the disabled mode.

When both enable pins are in a high logic state, all of the buffers are enabled, and the buffers and receivers pass data through to the output pins. This is referred to as the enabled or pass-through mode.

When only the low-logic enable pin is in a high logic state, the low (inverting) output buffers are enabled and the high (non-inverting) output buffers are disabled. This is referred to as the negative output mode.

Finally, when only the high logic enable pin is in a high logic state, the high (non-inverting) output buffers are enabled and the low (inverting) output buffers are disabled. This is referred to as the positive output mode.

The switching speed of the device depends on the input slew rate and the logic state of the enable pins. The device is typically capable of operating in the enabled and pass-through mode up to 300 MHz.

Conclusion

The 74VHCV541FT is a single-ended non-inverting buffer, driver, receiver, or transceiver that is utilized in a range of applications. It is composed of four separate buffers, each with two output buffers, one inverting and one non-inverting. It works in one of four modes, which are determined by the logical states of the enable pins. The output buffers can support an output logic voltage of between 0 and 5.5 V when supplying an output current of 24 mA. The device's switching speed is dependent on the input slew rate and the logic state of the enable pins. The device is typically capable of operating in the enabled and pass-through mode up to 300 MHz.

The specific data is subject to PDF, and the above content is for reference