74VHCT126AMTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Buffers, Drivers, Receivers, Transceivers

The 74VHCT126AMTR is a member of the High-Speed CMOS Logic family of logic devices. It is an quad-line non-inverting buffer and line driver. This device can be used to drive 4 data lines in either a positive or negative logic system. The 74VHCT126AMTR is specifically designed to increase the speed and reduce the power consumption of a logic system. It is available in the standard 14-pin dual-in-line package or the TSSOP-14 package.

Working Principle

The 74VHCT126AMTR is a Quad-line non-inverting buffer and line driver. This device is typically used to drive data lines in either a positive or negative logic system. It an increase the speed of a logic system. The 74VHCT126AMTR is a voltage-level device that operates over a 1.2-V to 4.6-V VCC range. The device has enables for each buffer and has both Disable and Enable inputs for the four buffers, which can be individually controlled. This device can be used in open-collector or open-emitter applications.

The device has four individual non-inverting buffers that drive the four outputs. Each output buffer is capable of driving up to 10 LS-type TTL loads or up to 2 bus lines of line drivers. Each buffer is designed to sink close to the specified pull-up resistance of the buses, VCC or VDD. The direction of each output is programmable to either source or sink. The direction of the outputs is either High (sink) or Low (source). The outputs can be placed in the high-impedance tri-state mode when the Disable (D) pin is taken low. This tri-state mode is nominally disabled when the Enable (E) pin is taken high.

Applications

The 74VHCT126AMTR is ideal for high-speed logic designs, such as networking, embedded systems, and digital-signal processing (DSP) applications. It is used for data transmission and reception, interface translation, and multiplexing applications. It provides protection from noise and can be used to drive large bus lines. The device is suitable for multi-master bus-oriented applications and can be used in a variety of applications in both single and multiple-channel systems. It is also suitable for use as a multiplexer or demultiplexer in limited-angle serial data transmission applications.

The 74VHCT126AMTR is widely used in networking, embedded systems, and digital-signal processing applications. It is ideal for driving large bus lines securely, and provides protection from noise. It is used for data transmission and reception, interface translation, and multiplexing applications. It is suitable for multi-master bus-oriented applications and can be used in a variety of applications in both single and multiple-channel systems.

Conclusion

The 74VHCT126AMTR is a quad-line non-inverting buffer and line driver device that is widely used in networking, embedded, and DSP applications. It is capable of driving up to 10 LS-type TTL loads and is suitable for driving large bus lines. It is used for data transmission and reception, interface translation, and multiplexing applications. It provides protection from noise and can be used to drive large bus lines securely.

The specific data is subject to PDF, and the above content is for reference