Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The 752083470GPTR13 is a resistor network, or array, which is a type of passive component that is used in electrical circuits. It consists of more than two such resistors interconnected between nodes. The purpose of such a component is to provide impedance or electrical resistance to a particular circuit or part of it. The component could be used to reduce noise, voltage drop, or other undesirable electrical effects.

Components

The 752083470GPTR13 is a four-terminal network, with a series of resistors combined in a parallel configuration. It consists of four resistors with the following ratings: R1 = 8kΩ, R2 = 20kΩ, R3 = 30kΩ, and R4 = 40kΩ. The component also includes two capacitors with the following ratings: C1 = 0.1uF and C2 = 0.22uF. All components are enclosed within a plastic package, with an EAR Package Identifier of E2020-67.

Applications

One of the primary applications for the 752083470GPTR13 is as an active filter. Filters are electrical circuits that are used to reduce the amount of unwanted frequency components that can pass through a circuit. By changing the values of the resistors and capacitors, the filter can be tuned to the desired frequencies, allowing the desired frequencies to pass while blocking the unwanted ones. It is especially useful for applications that require higher frequencies that are more difficult to filter.

The 752083470GPTR13 is also often used as an attenuator. Attenuators are circuits designed to reduce the levels of voltage or current that pass through a given circuit. This can be useful in applications where the voltage or current levels need to be reduced without introducing distortions or changing the signal’s characteristics. The 752083470GPTR13’s excellent tolerances make it ideal for these applications.

Finally, the 752083470GPTR13 can also be used as an impedance matching circuit. Matching impedance can be important in applications where the maximum power transfer is desired. The 752083470GPTR13 has an adjustable impedance that can be tuned to the desired level for maximum power transfer.

Working Principle

The 752083470GPTR13 works by connecting all of its four resistors in a series-parallel configuration. This causes the voltage and current across each of the resistors to be divided up according to the value of the resistor. The capacitors also play a role in the operation of the component, though they are not usually referred to in the datasheet. The capacitors act as simple frequency selective filters, allowing certain frequencies to pass through while blocking others. This gives the component its frequency response characteristics, which can be adjusted by changing the values of the resistors and capacitors.

The 752083470GPTR13 also functions as an impedance matching circuit. The component has an adjustable impedance that can be changed by adjusting the values of the resistors and capacitors. This allows the component’s impedance to be tuned to the desired level for maximum power transfer.

Conclusion

The 752083470GPTR13 is a four-terminal resistor network that can be used in a variety of applications, such as active filtering, attenuation, and impedance matching. It consists of four resistors and two capacitors in a series-parallel configuration. The component also has adjustable impedance that can be tuned to the desired level for maximum power transfer. By understanding its components, applications, and working principle, it is possible to effectively utilize the 752083470GPTR13 in electronic circuits.

The specific data is subject to PDF, and the above content is for reference