752105191AP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, specifically 752105191AP application field and working principle are commonly used in many different applications. Resistor networks are generally wired using a variety of different materials and value resistors made with different materials dependent upon the application, and are commonly used for power/voltage distribution, current sharing, and voltage sensing.

A 752105191AP is a type of resistor network that is specifically designed to be used in applications which require precise power and current control. This resistor network, as the name implies, consists of seven resistors normally arranged in a square formation with 5 common elements. Each of the 5 common elements is connected to a specific resistor in order to create a network of resistors which is then able to regulate the power or current that passes through it. The 7 resistors in the 752105191AP are arranged in the following manner:

R1 – The first resistor is connected in series to the input terminal of the network and acts as a current limiting resistor. This resistor is typically rated from 1-10 ohms depending on the application resistant that is required.

R2 – The second resistor is connected in parallel to the inputs and is used for current monitoring. This resistor is typically rated from 10-600 ohms. This resistor is used to measure the current that passes through the network, and its value is typically determined by the application requirements.

R3 – The third resistor is connected in shunt to the output terminals, and is used for power control. This resistor is typically rated from 1-10 ohms and is used to regulate the power that is delivered to the output.

R4 – The fourth resistor is used for voltage sensing, and is typically rated from 100-1000 ohms. This resistor is connected in series to the output terminals and is used to measure the voltage that is delivered to the output.

R5 – The fifth resistor is connected in parallel to the inputs and output terminals, and is typically rated from 200-1000 ohms. This resistor is used to monitor the current and voltage that passes through the network, and its value is typically determined by the application requirements.

R6 – The sixth resistor is used to buffer the output voltage, and is typically rated from 10-200 ohms. This resistor is connected in series to the output terminals and its value is typically determined by the application requirements.

R7 – The seventh resistor is a current limiting resistor, and is typically rated from 1-50 ohms. This resistor is connected in series to the output terminals and functions to limit the current that is delivered to the outputs.

The 752105191AP resistor network can be used in a variety of different applications but is commonly used in applications that require precise and accurate power and current control. This type of resistor network is ideal for use in power distribution, current sensing, voltage sensing, and current and voltage monitoring. Applications that utilize the 752105191AP resistor network include motor control, power converters, power supplies, power meters, AC power conditioning, and digital load controllers.

The working principle of the 752105191AP resistor network is based on the principle of Ohm’s Law in which electric current is proportional to the voltage across the resistor. In this type of resistor network, the values of all the resistors are carefully chosen so that the current and voltage are regulated as per the application requirements. When the input voltage is applied to the resistor network, the current that flows through each resistor is controlled by adjusting the voltage across the respective resistors. Since the current is limited by the total resistance of the network, the output voltage is also limited. This enables accurate power and current control.

In summary, 752105191AP application field and working principle are commonly used in many different applications such as motor control, power converters, power supplies, power meters, AC power conditioning, and digital load controllers. These resistor networks are designed to provide precise and accurate power and current control by utilizing the principle of Ohm’s Law in which electric current is proportional to the voltage across the resistors. By adjusting the voltage across each resistor, the current can be regulated as per the application requirements. The output voltage is also limited due to the total resistance of the network, which enables accurate power and current control.

The specific data is subject to PDF, and the above content is for reference