752181332GP

Number of Pins:	18
Height - Seated (Max):	0.100" (2.53mm)
Size / Dimension:	0.515" L x 0.080" W (13.08mm x 2.03mm)
Supplier Device Package:	--
Package / Case:	18-DRT
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	80mW
Series:	752
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	16
Tolerance:	±2%
Resistance (Ohms):	3.3k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks and arrays are designed to act as a switch in a circuit and provide a digital output. A resistor network consists of two electrodes (or resistors) which are arranged in an electrical pattern. The resistors are then connected to the power source and the output circuit.The main purpose of a resistor network, or array, is to control the flow of current from the power source to the output circuit. When the resistors are engaged, they form a voltage or current control which will determine the amount of power allowed to flow through the circuit. This is known as resistor-network topology.In digital circuits, it is also used to convert a logic signal into an analog signal. This is because digital logic gates typically require a specific voltage level to switch on or off. Therefore, when a resistor network is connected to the logic circuit, it acts as a voltage or current source, as it is required to provide the appropriate voltage level to switch off or on the digital logic gates.The 752181332GP is a basic resistor network which is suitable for use in a variety of applications. It contains 16 resistors which are arranged in a square fashion. These resistors can be connected in either a positive-ground configuration or in an alternating positive-negative configuration.In a positive-ground configuration, all of the resistors are at the same potential, but when in an alternating configuration, the middle resistors are at different potentials than the remaining resistors. This has the effect of providing a voltage that changes according to the arrangement of the resistors.Additionally, the 752181332GP can also be used in higher voltage applications, such as in digital systems, in which the voltage range can vary by as much as 15V. This is because the resistors are designed to be able to handle extremely high voltages.The 752181332GP can also be used in power switching applications, such as those that are found in motor control, signal conditioning, and voltage regulation. It can also be used to control the output voltage of LEDs, allowing the LEDs to be operated at the desired voltage level.Overall, the 752181332GP is a basic resistor network which is suitable for a variety of applications. It is designed to be able to handle the high voltage, as well as to provide a digital output in order to control the flow of current at a precise level. By utilizing the alternating positive-negative configuration, it is able to provide a varying amount of current to the connected circuit, offering a wide range of options for control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description