752241682GPTR7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, is a type of passive two-terminal electrical component which resists the flow of current in electronic circuits. As a key component, it has wide aplications in electronic circuits and various fields. In this article, we will introudce 752241682GPTR7 application field and working principle.

Application Field

752241682GPTR7 is a resistor network with a 16-pin dual in-line package (DIP), designed for surface mount applications in different fields. THe package is designed to provide both optimized performance and efficient board space saving when compared to the similar ICs in multiple packages. As it features high reliability and compact size, 752241682GPTR7 are widely applied in industrial sensing and control, low frequency analog signal circuit, wireless communication transceiver and receiver, consumer electronics, general-purpose driver, among others.

Working Principle

752241682GPTR7 is mainly composed of a resistor array and signal input/output pins. An operational amplifier (Opamp) compares the input voltage against the reference voltage and produces a signal with a magnitude proportional to the difference of the two. And, the comparator amplifies the difference between the inputs and produces the output voltage. The resistors connected to the inputs and outputs reduce the gain at high frequency, to improve accuracy and compensate for component variation over temperature.

The scan of 752241682GPTR7 is defined as follows: VIN is the input voltage applied to the device, VREF is the reference voltage applied to the non-inverting input, and VOUT is the output voltage from the device. The resistor array is used to isolate the various signals from each other. The resistance of the resistor array can be adjusted by simply changing the value of the reference voltage.

For example, if the reference voltage is set to 0.5V, the input voltage is 0.7V, and the resistor array is 24 Ohm, then the output voltage of the device will be 0.9V. The resistor array also provides protection against high frequency oscillations which can lead to false readings.

Conclusion

In conclusion, 752241682GPTR7 is a resistor network with a 16-pin DIP package that is designed for surface mount applications in multiple fields. The operational amplifier allows for accurate comparison between input and reference, and the resistor array isolates the various signals and provids protection against high frequency oscillations. The resistance of the resistor array can be adjusted by simply changing the value of the reference voltage.

The specific data is subject to PDF, and the above content is for reference