753241104GPTR13

Number of Pins:	24
Height - Seated (Max):	0.100" (2.53mm)
Size / Dimension:	0.345" L x 0.080" W (8.76mm x 2.03mm)
Supplier Device Package:	--
Package / Case:	24-DRT
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	40mW
Series:	753
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	22
Tolerance:	±2%
Resistance (Ohms):	100k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 753241104GPTR13 Resistor Networks, ArraysThe 753241104GPTR13 is a type of resistor network device used in both consumer and professional electronics fields. It is typically a four resistor array, and is often found in audio signal circuits, analog signal conditioning, and other related applications. This article will discuss the application field and working principle of the 753241104GPTR13, as well as the potential advantages and disadvantages of using this beast in certain circuit designs.The Application Field of 753241104GPTR13The 753241104GPTR13 has a number of use cases; however, the primary and most widely seen application is in audio signal circuits. With its four resistors, the 753241104GPTR13 can be used to convert an audio signal to a regulated voltage, or to attenuate (reduce) a signal’s amplitude or frequency. A 753241104GPTR13 can also be used in analog signal conditioning, i.e. giving a signal a linear, well-defined characteristic independent of the signal source. For example, a 753241104GPTR13 can be used to turn a Sine Wave into a Square Wave or vice versa. The 753241104GPTR13 can also be used in more complicated circuit applications. For example, it is common to use the 753241104GPTR13 to recover clock and data signals in time domain multiplexing (TDM) applications. Ostensibly, the 753241104GPTR13 can be used in a variety of audio related applications, namely VU meters, signal clippers, and signal mixers.Working Principle of the 753241104GPTR13 DeviceAnalog signal conditioning applications rely on the principle of voltage divider effect, and the 753241104GPTR13 works in the exact same way. A voltage divider network consists of two or more resistors connected in series. By connecting resistors in series, the total applied voltage is shared across each resistor according to the ratio of resistor values. As an example, suppose we have two resistors with values of 100kΩ and 50kΩ. The current flow through the two resistors would follow a certain ratio, which is dependent upon the reference voltage applied across the resistors. For example, if the reference voltage is 5V, then the voltage across the 100kΩ resistor would be 3V and the voltage across the 50kΩ resistor would be 2V. This also applies to the 753241104GPTR13 device, as each resistor value has a specific voltage assigned to it, and the output of the 753241104GPTR13 is simply the summation of the individual resistor values. Advantages and Disadvantages of the 753241104GPTR13 One of the primary advantages of the 753241104GPTR13 is its size. The 753241104GPTR13 is a small form factor device, which allows for it to be used in applications that require a small foot print such as a laptop computer, or other audio/video equipment. Additionally, the 753241104GPTR13 is typically more cost effective than other similar resistor network devices on the market. On the other hand, the 753241104GPTR13 has a few potential drawbacks. For example, the 753241104GPTR13’s size often makes it difficult to replace individual resistors in the case of failure. Furthermore, the 753241104GPTR13 tends to have higher noise levels compared with other, more expensive resistor networks. Lastly, the 753241104GPTR13 is sometimes limited in the frequency range that it can operate in, which can be an issue when dealing with high frequency audio signals. ConclusionIn conclusion, the 753241104GPTR13 is a popular resistor network device found in both consumer and professional electronics applications. It is primarily used for audio signal conditioning and other related applications, due to its small form factor and cost-effectiveness. The 753241104GPTR13 relies on the voltage divider principle, with each individual resistor in the device having a specific voltage assigned to it. The it can provide a number of advantages, such as its small size and cost-effectiveness; however, it also may have certain disadvantages, such as its noise level, and the potential difficulty in replacing single components if one should fail.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description