Allicdata Part #: | 1949-1091-ND |
Manufacturer Part#: |
765A-10 |
Price: | $ 602.91 |
Product Category: | RF/IF and RFID |
Manufacturer: | L3 Narda-MITEQ |
Short Description: | ATTENUATOR 0-5 GHZ TYPE N |
More Detail: | RF Attenuator 10dB 0Hz ~ 5GHz 50W N-Type In-Line... |
DataSheet: | 765A-10 Datasheet/PDF |
Quantity: | 5 |
1 +: | $ 548.10000 |
10 +: | $ 519.75000 |
Series: | 765A |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 10dB |
Frequency Range: | 0Hz ~ 5GHz |
Power (Watts): | 50W |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are devices for reducing the power of an electrical signal. The purpose of attenuators is to reduce the strength of a signal so as to avoid overloading a system or component. The range of attenuation achievable by an attenuator is usually dependent on its impedance and frequency, as well as the shape and size of the attenuator itself. The 765A-10 attenuator is an example of an attenuator that is designed for use in a variety of applications and operates over a wide frequency range.
The 765A-10 attenuator is a planar multilayer substrate-based attenuator that is ideal for applications that require a low insertion loss and maintain the signal integrity. The 765A-10 attenuator is designed for operation in the frequency range of DC to 18GHz, making it suitable for mobile communications, video/audio/voice, radar, antenna, satellite, and digital transmission applications. It is also suitable for use in military and aerospace applications where high levels of signal stability and reliability are required.
The 765A-10 attenuator is composed of a high frequency substrate, an inner layer that consists of a thin-film resistive material and an outer layer of a dielectric material. The substrate is designed to absorb the input signal and dissipate the output signal, thus providing reduced levels of signal power. The inner layer is made up of a thin film resistive material that is used to provide a uniform resistive characteristic, thus creating a desirable attenuation of the signal. The outer layer consists of a dielectric material that helps to improve the signal integrity.
The working principles of the 765A-10 attenuator are quite simple. When a signal is applied at the input, it enters the substrate and is propagated through the inner and outer layers. The inner and outer layers are made up of different materials with different impedances, and they act as an attenuator, causing a reduction in the signal power while also maintaining the desired signal integrity. The design also helps to reduce any distortion or crosstalk that may occur due to the signal transmission.
The 765A-10 attenuator is particularly useful in applications that require a low insertion loss and maintain the signal integrity over a wide range of frequencies. It is an ideal attenuator for applications such as mobile communications, video/audio/voice, radar, antenna, satellite, and digital transmission. It is also suitable for use in military and aerospace applications where high levels of signal stability and reliability are required. This makes the 765A-10 ideal for a wide range of applications and can provide a great benefit to many different industries.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...