766145201APTR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

A 766145201APTR13 resistor is a network of resistors connected together in an array. Its applications vary widely and depend on its configuration, type, and size. Generally speaking, this type of resistor is used for voltage regulation, noise reduction, and damping applications, such as audio attenuators and LED current control. The configuration of a 766145201APTR13 resistor also plays a part in determining its usage. Its two main configurations are a single resistor network and an independent resistor network.

Single Resistor Network

A single resistor network, as the name implies, is a network of resistors connected in a single, continuous chain. The chain is made up of resistors of various sizes that are arranged in a pattern according to its application. The most commonly used pattern is the bridge network, where two resistors are connected on either side of the circuit mated to the input and the output. This type of network is very common and is used in various audio and video circuit designs.

Independent Resistor Network

An independent resistor network, also known as a matrix, is a network made up of several individual resistors connected to a common ground point to create a single resistor. The resistors can be arranged in a variety of ways and can be configured to suit a wide range of applications. It’s commonly used in circuit designs where a device requires multiple current pathways, such as in power supplies and LED dimming.

Working Principle

The working principle of a 766145201APTR13 resistor is based on Ohm’s law, which states that the current passing through the resistor is inversely proportional to its resistance. This means that when the resistance of the resistor decreases, the current passing through is higher, and when the resistance increases, the current is lower. This property is used to regulate the voltage and current of a circuit. Depending on the application, the resistors can be either switched on or off, increasing or decreasing their resistance as required.

The 766145201APTR13 resistor is also used in various audio and video circuits to reduce noise and boost signals. This is achieved by setting the resistor to its lowest possible resistance setting and allowing the signal to pass through without any resistance. The result is a clear, clean audio signal.

Conclusion

The 766145201APTR13 resistor is a versatile and reliable component that can be used in a variety of applications. Its two main configurations, single resistor network and independent resistor network, allow it to be configured to meet any specific requirements. Its simple working principle, which is based on Ohm’s law, allows it to be used to regulate voltage and current, reduce noise, and boost audio signals.

The specific data is subject to PDF, and the above content is for reference