766161332GPTR13

Number of Pins:	16
Height - Seated (Max):	0.069" (1.75mm)
Size / Dimension:	0.390" L x 0.154" W (9.90mm x 3.90mm)
Supplier Device Package:	--
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	80mW
Series:	766
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	15
Tolerance:	±2%
Resistance (Ohms):	3.3k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What is a 766161332GPTR13 Resistor Network?

A 766161332GPTR13 Resistor Network (or GPTR13 resistor network) is a type of resistor array designed for applications where space is limited or load power dissipation needs to be kept to a minimum. The GPTR13 resistor network is composed of four individual, surface mount resistors that are all connected together in series, intermittently. The four individual resistors form what is essentially a four-terminal network and are suitable for use in a variety of different applications.

What are GPTR13 Resistor Networks Used For?

GPTR13 resistor networks are frequently used in analog circuits and systems to divide voltages, act as current limiting devices, and adjust impedance levels. For example, in an amplifier circuit, the GPTR13 network can be used to divide the input signal voltage in order to create an output signal of a desired voltage level. In general, GPTR13 networks are more accurate than individual resistors in certain applications or when repeatability is necessary. Therefore, they are widely used in precision analog, RF, and audio systems.

The Working Principle of a GPTR13 Resistor Network

A GPTR13 resistor network works by transferring signals through its four terminals: the first, second, third, and fourth terminals. The four resistors are linked in series, but the configuration will vary depending on the application. For example, for an amplifier, the GPTR13 would be configured such that one resistor is between terminals one and two, a second resistor is between terminals two and three, a third between terminals three and four, and a fourth between terminals four and one. This configuration allows the output signal to have a desired voltage level, as the signal is divided among the four resistors. In other applications, such as in a wiring harness, the GPTR13 network would be connected in a slightly different configuration, allowing the signal to be distributed evenly across the four terminals.

Advantages of Using a GPTR13 Resistor Network

A GPTR13 resistor network is a great choice for applications that require high accuracy, as they are much more accurate than using single resistors. Additionally, since the GPTR13 is surface mount, it takes up less space than discrete resistors, which is beneficial in systems where space is at a premium. Finally, GPTR13 networks are also relatively inexpensive, making them a cost-effective solution for many applications.

Conclusion

GPTR13 resistor networks are an excellent choice for applications that require precision and accuracy, but where space is limited or load power dissipation should be kept to a minimum. In these cases, the GPTR13 network provides a reliable solution that is cost-effective, accurate, and relatively easy to install.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description