766165601APTR13

Number of Pins:	16
Height - Seated (Max):	0.069" (1.75mm)
Size / Dimension:	0.390" L x 0.154" W (9.90mm x 3.90mm)
Supplier Device Package:	--
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	80mW
Series:	766
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	28
Tolerance:	±2%
Resistance (Ohms):	1.2k
Circuit Type:	Dual Terminator
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks are made up of a set of resistors arranged in specific configurations. Depending on the configuration, the resulting output could be anything from the sum of all resistors to more complex networked behavior such as dividers, multiplexers, bridges, delays, and other analog designs. 766165601APTR13 is a series of resistor networks made by AVX Corp. This series is specifically designed for adhering to coaxial cables and filters used in the wireline telecommunication industry.The 766165601APTR13 is a resistor array that offers high-speed, low-resistance, and high-accuracy measurements for switching operations. This series is designed to connect to coaxial cables, thus absorbing all sensitive signals it sees, while at the same time providing accurate results for either monitoring or communication applications. The 766165601APTR13 is capable of operating in data rates up to 200MHz and can provide up to 50 Ohms of impedance.The 766165601APTR13 consists of four boards that feature a standard layout with a two-pin and four-pin configuration. Each board contains 16 individual chips that measure from 0.1% accuracy to 0.01% accuracy of their rated value resistance. The components of the 766165601APTR13 are all rated for International requirements such as Nickel Iron, Nickel Chromium, Copper Iron, and Copper NiFe, and have been tested to meet 50 VDC withstand and surge voltage requirements.The 766165601APTR13 resistor networks are most commonly used in data communication and telecommunication applications, as well as in filtering, bridging, or delay circuits. The resistor networks have been designed with a low-inductance network that can help to reduce signal distortion due to ringing or spiking. The low inductance also helps to minimize noise interference, allowing the signal to deliver accurate data results.The 766165601APTR13 is a low-cost, high-performance solution for various communication and data communications applications. The boards are easy and quick to install, and provide unparalleled accuracy compared to other resistor networks and arrays. With their high speed, low-resistance and accurate measurements, the 766165601APTR13 is an integral part of many machine automation, server, and telecommunication communication systems.The working principle behind the 766165601APTR13 is based on Ohm\'s Law, which states that the amount of resistance in an electric circuit is equal to the voltage applied over the current flowing in the circuit. In other words, a greater voltage will cause more current to flow through a network made up of resistors, and in turn, the greater the resistance of the network, the less current will pass through it.The 766165601APTR13 resistor networks work by connecting the 16 individual series/parallel-connected chips across the board. The individual chips are arranged in a specific configuration to provide a low resistance path providing accurate results. Each chip is set to a specific value of resistance, and therefore the combinations of all of the chips result in an overall resistance of the board.Overall, the 766165601APTR13 is an excellent solution for machine automation, server, telecommunications and communication applications. The boards are designed to offer high-speed, low-resistance, and high-accuracy measurements for switching operations. The low inductance of the board helps to reduce noise interference, and the standardized layout of the network makes the installation process quick and easy. Lastly, the overall resistance of the 766165601APTR13 board comes out to fifty ohms, which is an ideal resistance for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description