768201472GP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are so ubiquitous in modern electronics that they can be found in almost all types of electronic equipment. A 768201472GP application field is a digital resistor network. It is widely used in power off protection, short-circuit protection, and surge protection for various consumer and industrial electronic devices. It can help to protect electronic circuits from damage due to overcurrent, overload, reverse polarization, and electrostatic discharge.

A common configuration of a 768201472GP application field is a nine-pin configuration. This nine-pin configuration consists of eight resistors and one capacitor. The resistors are usually organized in a ladder pattern and are coupled together in series. The value of each resistor is determined by its position in the ladder. The capacitor is used to store energy and dampen any electrostatic noise that may be present.

The resistance values for the eight resistors in the 768201472GP application field range from 1 kΩ to 1 MΩ. The capacitor typically has a capacitance value of around 1 μF. Thus, the typical values of the resistors and capacitor are 1 kΩ, 2.2 kΩ, 4.7 kΩ, 10 kΩ, 22 kΩ, 47 kΩ, 100 kΩ, and 1 MΩ. The current limit of these resistors are also found in the datasheet.

The working principle of the 768201472GP application field is quite simple. When the circuit is connected to a power source, the voltage at each resistor is initially zero. When the circuit senses an increase in the current, it will start to discharge the stored energy, thus decreasing the voltage at each resistor. Depending on the resistor values, the decrease in voltage will cause a reduction in current, which in turn helps to protect the circuit.

In addition to the usual protection functions, the 768201472GP application field also provides a wide range of other features. For example, it can detect an overload in the circuit and trigger a reset. It can also be used as a voltage reference or as an active filter in circuits. Furthermore, the resistors in the application field can be used to control the speed of motors, reduce the voltage drop across a resistor, or even as a reference for measuring current in a circuit.

The 768201472GP application field is a simple yet versatile tool for protecting circuits against overcurrent, overload, reverse polarization, and electrostatic discharge. It has many useful applications in the modern electronic device and is widely used in consumer and industrial devices. With its various features and configurations, it is a valuable addition to any circuit designer’s toolbox.

The specific data is subject to PDF, and the above content is for reference