Allicdata Part #: | 1949-1100-ND |
Manufacturer Part#: |
768A-20 |
Price: | $ 311.77 |
Product Category: | RF/IF and RFID |
Manufacturer: | L3 Narda-MITEQ |
Short Description: | FIXED ATTENUATOR 20DB |
More Detail: | RF Attenuator 20dB 0Hz ~ 11GHz 20W N-Type In-Lin... |
DataSheet: | 768A-20 Datasheet/PDF |
Quantity: | 4 |
1 +: | $ 283.42400 |
10 +: | $ 264.83600 |
Series: | 768A |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 20dB |
Frequency Range: | 0Hz ~ 11GHz |
Power (Watts): | 20W |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electrical devices that reduce the strength of a signal by reducing its power level. The main purpose of an attenuator is to protect a sensitive device, such as a high-powered amplifier, from receiving too much signal. Attenuators are used in a variety of applications, including radio communication, satellite receiving, automotive electronics, telecommunications, and even in the medical field. One type of attenuator is the 768A-20 attenuator.
768A-20 Application Field
The 768A-20 attenuator is used in a variety of different applications, including broadcast television, CATV, Radio broadcast, and satellite communications. This type of attenuator is also used in cellular and long-distance repeater systems, and as an interstage or matching and equalizer unit. The 768A-20 attenuator is a low-cost and high-performance attenuator, which makes it a very popular choice for many applications.
768A-20 Working Principle
The 768A-20 attenuator works by reducing the power of a signal before it reaches a load, such as an amplifier or other sensitive device. The attenuator is designed to reduce the signal power level without affecting the performance of the receiving device. The device does this by using an adjustable network consisting of inductors and resistors in a symmetrical or balanced configuration. This configuration allows for a controlled reduction of signal power over a specific range of frequencies and input levels.The attenuator also has two sections: an input section and an output section. The input section is where the signal enters the device, and the output section is where the signal is reduced or attenuated. The adjustable network is located between the two sections, and it is used to precisely control the amount of signal reduction. The 768A-20 attenuator also has a temperature-compensating circuit that keeps the attenuation constant over a wide range of temperature. This allows for reliable operation under varying environmental conditions.
Conclusion
The 768A-20 attenuator is a reliable and robust device that is used in a variety of applications. The device uses an adjustable network consisting of inductors and resistors to reduce the power of a signal without affecting the performance of the receiving device. The attenuator also has a temperature-compensating circuit that keeps the attenuation constant over a wide range of temperatures. This allows for reliable operation under varying environmental conditions.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
768A-30 | L3 Narda-MIT... | 301.2 $ | 10 | FIXED ATTENUATOR 30DBRF A... |
768A-10 | L3 Narda-MIT... | 311.77 $ | 5 | FIXED ATTENUATOR 10DBRF A... |
768A-6 | L3 Narda-MIT... | 311.77 $ | 5 | FIXED ATTENUATOR 6DBRF At... |
768A-20 | L3 Narda-MIT... | 311.77 $ | 4 | FIXED ATTENUATOR 20DBRF A... |
768A-3 | L3 Narda-MIT... | 311.77 $ | 3 | FIXED ATTENUATOR 3DBRF At... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...