770101392

Number of Pins:	10
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	1.000" L x 0.098" W (25.40mm x 2.50mm)
Supplier Device Package:	10-SIP
Package / Case:	10-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	100mW
Series:	770
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	9
Tolerance:	±2%
Resistance (Ohms):	3.9k
Circuit Type:	Bussed
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, ArraysResistor networks, or arrays, are a configuration of resistors connected together in various arrangements to provide a predetermined output resistance. The basic configuration is that of a simple ladder, with multiple “branches,” or levels connected together to provide the resistance. As the component count increases, more complex combinations can be used to tailor the resistance for specific applications.For example, a pi (π) network build of three or more resistors in parallel will provide a wide range of output values. By changing the ratio of the resistors connected in parallel, the output resistance can be tailored according to the need. One of the most common applications is for voltage regulation.In the 770101392 application field, there are two basic types of resistor networks: unidirectional and bidirectional. Unidirectional networks allow current to flow in only one direction, or from one node to the other, while bidirectional networks allow current to flow in either direction.In unidirectional networks, the resistance value is typically limited to the largest resistor used in the network. This is because the resistance of the small resistors will be dissipated by the largest resistor. Bidirectional networks, on the other hand, provide a much wider range of output values, as they are able to dissipate much higher currents than their unidirectional counterparts. A bidirectional network also has the benefit of allowing for the use of larger resistors, which will help to reduce power dissipation and reduce the total number of components in the configuration.The working principle of a resistor network is fairly simple. Current is applied to the input and then distributed through the ladder of resistors. The current will be spread out over the network and, depending on the type of network, will either be completely dissipated, or remain at the same level as the original input.As an example, in a unidirectional network, the output voltage of the network will be the same as the input voltage. This is because the total resistance of the network is equal to the smallest resistor in the network. Thus, the current is spread evenly between the resistors and dissipated by the largest resistor.In a bidirectional network, the output voltage of the network will be higher than the input voltage. This is because the total resistance of the network is less than the smallest resistor in the network. In this case, the current will be spread out over the resistor and remain at the same level as the input voltage. In both of these cases, the resistance network is able to provide a predetermined output voltage or resistance range. This makes resistor networks a popular choice for voltage regulation and other applications where a predetermined output range is required. Resistor networks can also be used for power distribution in high-voltage systems. In this case, a resistor ladder is built to supply a large current to the loads. The resistor ladder reduces the voltage drop across the device by providing a large voltage differential between the input and output nodes.In addition, these networks can be used to reduce voltage transients in high-current systems. By providing a low output resistance, the system can be designed to quickly absorb the high-current transients, preventing them from causing damage to other components. This is an especially important application for sensitive electronics and other equipment.Resistor networks are a versatile and extremely useful components which are found in many different industries. By understanding the basics of how these networks function, engineers and technologists can use them to create more reliable and efficient designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description