77311-827-29LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular connectors such as the 77311-827-29LF are connectors commonly used for a wide variety of applications. Such connectors are widely designed for use in computer, consumer, medical, and industrial applications.
The 77311-827-29LF is a straight male pin connector that consists of a header and two pins. It is commonly used in the connection between a printed circuit board (PCB) and some external signal or power source. It utilizes contact between the pins and the PCB to achieve connection. This kind of connector is especially suited for applications that require frequent interconnection and disconnection due to the convenience of the insertion/extraction of the plug. The 77311-827-29LF has two pins with 5.125mm (.204”) pitch. The inner diameter of the two pins is 0.51mm (.020”) while the outer diameter is 0.76mm (.030”). The metal material for the conductor pins is copper and it has gold plating for better conductance. The thickness of the gold plating is 0.1 to 0.7 microns. The body material is either polybutylene terephthalate (PBT) or liquid crystal polymer (LCP). A rubber boot or pressure washer is also provided for cable strain relief for the two pins. The 77311-827-29LF is relatively simple to install and remove due to its two pins design. Just plug the two pins into the socket on a PCB and then apply crimp or solder connection depending on the application’s demands. Once the connection is secured, a user can easily remove it by simply pinching the tab of the header located on top of the pins. The working principle of the 77311-827-29LF is to provide low impedance electrical interconnection between two conducting materials. The pins provide electrical contact between the printed circuit board (PCB) and the external device. The material of the metal pins is carefully chosen and designed to ensure good conductivity, while the body material like PBT or LCP provides insulation protection to prevent shorting between the two pins. Overall, the 77311-827-29LF rectangular connector is widely used and well suited for a number of applications. Its two pins design offers easy installation, connection, and removal. Its gold plated pins are carefully designed to provide adequate electrical conductivity and the body material like PBT or LCP provide electrical insulation. It also has a rubber boot or pressure washer for cable strain relief. Hence, if users are searching for a compact rectangular connector for their application or system, the 77311-827-29LF would be a great choice.

The specific data is subject to PDF, and the above content is for reference