7B25000167

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals

Crystals are the basis of many electronics, particularly in the area of communications. The use of crystals enables devices to reach very high accuracy in frequency control, and to operate in environments where other solutions would not be possible. A good example of this is the 7B25000167, a type of crystal oscillator.

The 7B25000167 is a quartz oscillator that is widely employed in applications ranging from PWM controllers, frequency synthesizers and other frequency-dependent circuits. It consists of two main components: an oscillator and an amplifier. The quartz oscillator is made of an AT-cut quartz crystal, which is then connected to an amplifier circuit. The oscillator works by periodic electrical pulses, which cause the quartz crystal to oscillate at a predetermined frequency. By amplifying the signal from the quartz crystal, the 7B25000167 produces a very precise frequency output.

The 7B25000167’s application field includes telecommunications, automotive electronics, industrial control, medical electronics, and military applications. In each of these applications, the 7B25000167’s precise frequency output is of key importance. In telecommunications, for example, it is used to improve the accuracy and reliability of communications. Its tight tolerance in frequency control ensures fewer errors occur in data transmission. It is also used in automotive electronics, industrial control, and medical electronics to help increase accuracy and reliability in vehicular systems, industrial machinery, and medical devices.

The working principle of the 7B25000167 is based on the quartz crystal, which oscillates at a predetermined frequency when it receives electrical pulses. The quartz crystal is precisely doped to achieve a very stable output frequency. The 7B25000167 then amplifies the signal from the quartz crystal to create a highly precise output. The amplifier is usually integrated into the oscillator, so that the output is a single, reliable signal. The frequency accuracy of the 7B25000167 is typically between 50ppm and 250ppm, which is very high for crystals of this type.

To summarize, the 7B25000167 is a quartz oscillator commonly used for a wide range of telecommunications, automotive electronics, industrial control, medical electronics and military applications. Its precise frequency control ensures that data transmission is accurate and reliable, and it is also tightly doped for a very stable output. The working principle of the 7B25000167 is based on the quartz crystal that oscillates at a predetermined frequency when it receives electrical pulses, which is then amplified to create a highly precise output.

The specific data is subject to PDF, and the above content is for reference