| Allicdata Part #: | 7V50070003-ND |
| Manufacturer Part#: |
7V50070003 |
| Price: | $ 0.32 |
| Product Category: | Crystals, Oscillators, Resonators |
| Manufacturer: | TXC Corporation |
| Short Description: | CRYSTAL 50MHZ 19PF SMD |
| More Detail: | 50MHz ±20ppm Crystal 19pF 4-SMD, No Lead |
| DataSheet: |  7V50070003 Datasheet/PDF |
| Quantity: | 1000 |
| 3000 +: | $ 0.28547 |
| Series: | 7V |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Type: | MHz Crystal |
| Frequency: | 50MHz |
| Frequency Stability: | ±25ppm |
| Frequency Tolerance: | ±20ppm |
| Load Capacitance: | 19pF |
| Operating Mode: | -- |
| Operating Temperature: | -40°C ~ 85°C |
| Ratings: | -- |
| Mounting Type: | Surface Mount |
| Package / Case: | 4-SMD, No Lead |
| Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
| Height - Seated (Max): | 0.035" (0.90mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
When it comes to crystals, 7V50070003 has a range of applications and works on the principle of resonance. This crystal is popular in both industrial and medical settings because of its relatively small size and efficiency. As a result, it is commonly used in oscillators, timers and mobile devices.
The 7V50070003 crystal is a series of ceramic packaged oscillators that use a quartz crystal to create a mechanical resonant device. The device works by providing an electrical signal with a precise frequency. By using the resonance of the quartz crystal, this signal can travel with different frequencies which correspond to different voltages.
The 7V50070003 is made up of four main parts. The first part is the quartz crystal, which is responsible for the frequency of the signal. The second part is the feedback loop, which controls the frequency of the signal. The third part is the oscillator, which converts the signal from the crystal into an electrical signal. Finally, the fourth part is the output circuit, which controls the output of the oscillator.
The 7V50070003 works in two parts: the Piezo electric and AC resonator. The Piezo electric component is a ceramic disc which acts as the electrical component of the oscillator. The AC resonator is a quartz crystal which is responsible for providing the precise frequency of the signal. The frequency of the signal is determined by the resonance of the crystal, and is then amplified and turned into an electrical signal.
The 7V50070003 is commonly used in industrial applications such as manufacturing, robotics and automation. In the medical field, it is used to power surgical tools and medical equipment. In addition, it is also used in mobile devices such as cell phones and tablets.
The 7V50070003 crystal is an efficient and cost effective oscillator, and is well suited for a variety of applications. Its small size and efficiency make it ideal for use in medical and industrial settings. Its precise frequency coupled with its resonance makes it highly reliable, and it is the go-to choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| 7V50070003 | TXC Corporat... | 0.32 $ | 1000 | CRYSTAL 50MHZ 19PF SMD50M... |
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...