7W50002013

Voltage - Supply:	3.3V
Height - Seated (Max):	0.056" (1.42mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-10°C ~ 70°C
Frequency Stability:	±20ppm
Series:	7W
Output:	CMOS
Function:	Enable/Disable
Frequency:	50MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 7W50002013 Oscillators

7W50002013 oscillators are widely used in many fields such as communications, measurement, and automotive applications. This type of oscillator contains a quartz crystal that generates an oscillating signal. This oscillating signal is then amplified and modified to meet the desired characteristics. The output of the oscillator can be either voltage or current and will usually be at a fixed frequency.

Applications of 7W50002013 Oscillators

7W50002013 oscillators are necessary components in a variety of electronic systems. They are used to keep track of times and frequencies, measure the distances, operate devices, and as reference signals for other devices.These oscillators are usually used in communications, measurement and automotive applications. In communications, these oscillators are used to generate the clock signals in devices such as modems, base stations, and mobile phones.In measurement and automotive applications, these oscillators are used to generate the fundamental clock frequency for the microcontroller, control the circuit current, and measure the angles via a gyroscope. They are also often used to provide a low-cost alternative to high-end frequency references and generate the clock signal for digital logic.

Working Principle of 7W50002013 Oscillators

The working principle of 7W50002013 oscillators is based on two main concepts: resonance and feedback. In this type of oscillator, a quartz crystal acts as the resonator. When it is connected to a power source and an inductor, it forms an electrical circuit.When a signal is applied to the quartz crystal, it starts to vibrate and oscillate at frequencies that are a function of its physical characteristics. This vibration produces electrical signals that are then sent to the amplifier and then the output that is in the form of an electrical waveform. The feedback loop is required to ensure that the waves oscillate at the desired frequencies. This is done by sending the output signal back to the circuit and adjusting the input signal until the desired frequencies are achieved. The amplifier amplifies the input signal and the quartz crystal, acting as a filter, filters out any unwanted frequencies.

Conclusion

In conclusion, 7W50002013 oscillators are an important type of oscillator that are used in a variety of applications. They are based on the principles of resonance and feedback and contain a quartz crystal that acts as the resonator and filters out any unwanted frequencies. These oscillators are used for generating the clock signals in communications, measuring distances, operating devices, and providing alternative frequency references.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description