80F1K33

Series:	Acrasil® 80
Packaging:	Bulk
Part Status:	Active
Resistance:	1.33 kOhms
Tolerance:	±1%
Power (Watts):	10W
Composition:	Wirewound
Features:	--
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.406" Dia x 1.843" L (10.30mm x 46.80mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through-hole resistors are electronic components that limit current and provide a known resistance value. The 80F1K33 is a standard through-hole resistor series used in variety of applications. A through-hole resistor is an electrical component with two leads, which are connected to terminals. The lead wires are then inserted into the holes of a printed circuit board. These components are used in a variety of applications, including signal conditioning, current limiting, and voltage protection.

Application Field

The 80F1K33 resistors are used in a variety of applications, including signal conditioning, current limiting, and voltage protection. In signal conditioning, the resistor can be used to adjust the gain or attenuation of the signal. For current limiting, the resistor can be used to protect a circuit from excessive current, while for voltage protection, the resistor can be used to ensure that voltage levels remain within an acceptable range. In addition to these uses, the 80F1K33 resistor series is also used in low-noise amplifier circuitry, power supplies, and for impedance matching.

Working Principle

The 80F1K33 series resistors provide a known resistance value to the circuit, which is determined by the value of the resistor. Depending on the resistor’s value, this resistance can be as low as 0.05 ohms or as high as 100K ohms. In a circuit, when a voltage is applied across the resistor, current flows through the component. This current is limited by the resistance of the component and it is this limit that is used to protect or control the circuit.

Conclusion

The 80F1K33 is a series of through-hole resistors used in a variety of applications. These resistors provide a known resistance value, which is determined by the value of the resistor. The resistors are used in signal conditioning, current limiting, and voltage protection applications. The 80F1K33 series of resistors provide reliable and consistent performance, making them a preferred choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description