80HCPS1848CBR-58

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Specialized ICs: 80HCPS1848CBR-58 application field and working principleThe 80HCPS1848CBR-58 is a sophisticated 8-bit, flash-based microcontroller with a low power CMOS technology. This device falls into the category of specialized ICs and comes with an overall enhanced architecture, combined with on-chip peripherals and integrated system options. It is suitable for a wide array of applications. This unit has 6 different function modes, allowing it to be used in various capacity and special purpose system architectures.The device comes integrated with 8-bit data paths, serial port, onboard interrupts, and an internal memory of 256K that is much larger than other 8-bit microcontrollers. It also has glitch-free, reliable power input and output ports, making it suitable for applications that require stability and accuracy.The 80HCPS1848CBR-58 can be used for power conversion, multidrop networks, and AC current control. It offers enhanced support for IP-based networks, and is highly reliable for applications such as real-time control applications, medical instrumentation, and instrumentation systems. It has advanced features such as timed pulse monitoring, pulse-width measurement and feedback control.The 80HCPS1848CBR-58 is powered by a 5V source with a nominal supply current of 40mA. This supply current can be reduced to 10mA during active operation mode. The device comes with a variety of operating parameters that can be used to achieve maximum flexibility, power efficiency and reliability.The internal architecture of the device consists of a 16-bit address bus and an 8-bit data bus for I/O ports. This architecture provides a total of 24 I/O ports, in addition to several special function buttons. The device also has an integrated phase detector, oscillator, programmable current protection circuitry,and two 16-bit non-blocking asynchronous channels.Working principle of the device is quite straightforward. When power is applied to the device, the CPU begins executing the on-chip-programmed firmware. It then polls the input pins in a loop to detect signals and process commands accordingly. The control flow is managed by the interrupt controller and the on-chip ADC.The device can detect input signals in the form of logic levels, digital signals and analog signals. For analog signals, the device uses its ADC and/or DAC to convert the analog signals into digital signals. The controller then processes these signals and transmits the result back over one of the external I/O ports. The process is continued until the user changes the input data or stops the device.In conclusion, the 80HCPS1848CBR-58 is a highly specialized IC for applications such as power conversion, multidrop networks and AC current control. It features advanced features such as IP-based networks and a built-in programmable current protection circuitry, timing pulse monitoring, pulse-width measurement and feedback control. Its internal architecture consists of 8-bit data paths, serial port, on-board interrupts, and an internal memory of 256K, with the CPU being powered by a 5V source with a nominal supply current of 40mA.The work process of the device is quite straight forward, where it polls the connected input pins, converting analog signals into digital signals via its ADC and/or DAC, and transmits the resulting data over one of its external I/O ports. As a result of its integrated peripherals, special function buttons and an enhanced architecture, the 80HCPS1848CBR-58 is a reliable and powerful device ideal forreal-time control applications, medical instrumentation and instrumentation systems. 

The specific data is subject to PDF, and the above content is for reference