8230-92

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, also known as chokes, coils, and reactances, are components that are primarily used to store electrical energy in the form of a magnetic field. The inductor acts as a barrier to keep current from flowing, thus controlling the amount of current that passes through. Fixed inductors range from 8230 to 9200 and have various applications in electronics.

8230-9200 Application Field and Working Principle

There are a wide variety of fixed inductor applications, including radio and audio frequency (RF) circuits, switching power supplies, and communications applications. The approximate range of 8230 to 9200 can be found in applications such as RF and microwave circuitry, power supplies, and communications circuits.

The working principle of fixed inductors revolves around the induction effect in which a changing magnetic field induces a current or voltage in a coil. This phenomenon generates an electromotive force in a coil that can then be used to regulate the current in the coil and, thus, regulate the current flow in the circuit. This makes the fixed inductor ideal for limiting or controlling current in circuits.

When dealing with fixed inductors, it is important to note the types of coils used in applications. Common coil types used in RF and microwave applications are wound air-core coils, printed coils, and ferrite-core coils. Each type of coil has its own unique characteristics and affects the final inductance in the circuit.

Air-Core Coils

Air-core coils are the simplest and most cost effective coil. They are manufactured by winding a continuous wire on an insulating form such as a spiral or tubular shape. The inductance of the coil is controlled by both the number of turns and the size of the coil. Air-core coils tend to have the highest values, up to 9200, and are primarily used in low-frequency applications.

Printed Coils

Printed coils are manufactured by depositing a conductive layer on a dielectric substrate such as a printed circuit board (PCB) and then etching it to form a conductive loop. The loop can then be soldered or formed into a shape to form a coil. The advantage of printed coils is that they are easily mass produced at a lower cost than other coil types. They are used primarily in high-frequency applications such as RF and microwave.

Ferrite-Core Coils

Ferrite-core coils are manufactured by winding a wire around a ferrite core material, which provides an inductor with an increased inductance relative to an air-core type. Ferrite cores are primarily used in high-frequency radio and communications systems due to the increased inductance values they provide. Ferrite cores also add gap to the inductor to minimize the loss of energy due to eddy current heating.

Fixed inductors, such as those found in applications from 8230 to 9200, can be used for a wide variety of tasks in electronics. They are primarily used to control or regulate current in a circuit by generating a counter electromotive force in a coil. Various types of coils can be used in each application, such as wound air-core coils, printed coils, and ferrite-core coils. No matter which type is used, fixed inductors are a key component of many modern electronic devices.

The specific data is subject to PDF, and the above content is for reference