82P2284BBG8

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Transceiver
Protocol:	T1, E1, J1
Number of Drivers/Receivers:	--
Duplex:	Half
Data Rate:	--
Voltage - Supply:	1.8V, 3.3V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	208-BGA
Supplier Device Package:	208-PBGA (17x17)
Base Part Number:	IDT82P2284

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

82P2284BBG8 is an interfacing chip for connecting several components in serial communications, indicating drivers, receivers, transceivers, etc. With the help of this chip, users can quickly and easily carry out the communication between two or more devices. It has the capacity of transmitting and receiving data at a higher rate and it provides the flexibility of controlling the communication interface between different systems. Moreover, with the correct configuration and parameters, it also supports devices with different voltage levels, while managing the data flow. This article will shed light on the application field and working principle of 82P2284BBG8.

Application Field

82P2284BBG8 is mainly used as an interface to bridge the gap between a device and an operational system. It can interface with any type of devices, like sensors, peripherals, and other communication devices. The main application fields are the followings:

• Industrial Automation: 82P2284BBG8 is used in many industrial applications such as robotics, process control and CNC (Computer Numerical Control) machinery.
• Medical & Healthcare: 82P2284BBG8 is used in medical devices as it Connects to medical equipment, sensors, and instruments.
• Industrial Communication Networks: 82P2284BBG8 is used extensively in automation systems, industrial communication networks, building automation, and control systems.
• Telecommunications: 82P2284BBG8 are widely used in telecommunications systems for providing the back end connection between different telecommunication devices.
• Aerospace: 82P2284BBG8 is used in hardware components of aircrafts, spacecrafts and satellites to establish the connection between the hardware and the software.

Working Principle

The working principle of 82P2284BBG8 is based on a 16-bit microcontroller-based system. It has two sections, that is, the data processing section and the serial communication section. The data processing section processes the data that is to be transmitted or received, and manages the serial communication section. The serial communication section includes transmitters and receivers, which establish the serial communication between two or more devices. The signal naming conventions of the 82P2284BBG8 chip include A, B, C, G, H, and L. These signal names form the basis of the functioning of the entire 82P2284BBG8 chip, and they denote a certain type of data. The signal naming conventions are as follows:

• A – Data Input: This is the data that is transferred by the chip to an external device.
• B – Data Output: This is the data that is received by the chip from an external device.
• C – Clock Input: This is used for synchronizing the data input and data output of the device.
• G – Ground: This is used for connecting the device to its power supply.
• H – High logic: This is used to denote the high logic of the device.
• L – Low logic: This is used to denote the low logic of the device.

The 82P2284BBG8 chip supports the following communication protocols: RS-232, RS-422, RS-485, IEEE 1394 and CAN bus. These protocols are used to communicate between two or more devices. The working principle of the 82P2284BBG8 chip varies depending on the protocol used. For example, in the case of RS-232, the transmitters and receivers at both the ends of the connection send and receive data in a predefined pattern that is known as Handshaking. This process is used to establish the connection between the two systems. Similarly, the other protocols like RS-422, RS-485, and IEEE 1394, use the same process to establish the connection between the two systems.

In addition to these protocols, the 82P2284BBG8 chip also supports the CAN bus protocol. This is a serial network protocol used for communication between multiple devices over a common cable. The main advantage of the CAN bus protocol is that it allows multiple devices to communicate with one another without a central controller. Thus, it reduces the total number of wires required to connect multiple devices. The CAN bus protocol is used in many applications such as industrial automation systems and automotive applications.

Conclusion

82P2284BBG8 is an interfacing chip for connecting several components in serial communications, indicating drivers, receivers, transceivers, etc. It is primarily used as an interface for connecting two or more devices for communication. It supports a number of communication protocols including RS-232, RS-422, RS-485, IEEE 1394, and CAN bus. The 82P2284BBG8 chip also provides flexibility in managing the data flow and changing the voltage levels of the different devices. The 82P2284BBG8 chip is used in a wide range of applications including industrial automation systems, medical & healthcare systems, industrial communication networks, telecommunications systems, and aerospace hardware components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description