8502 010100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single Conductor Cables (Hook-Up Wire) are a type of cables used widely in industries which comprise of a single insulated conductor enclosed in an outer jacket composed of polyvinyl chloride (PVC). The purpose of this wire is to provide a means for electrical connections between different components and appratuses which can be easily installed and disconnected. The 8502 010100 field is one of the many measurement and automation applications which utilize these types of cables.

The 8502 010100 is essentially a single-core cable which includes resistance and capacitance characteristics with a maximum overall diameter of 0.225 inches. This type of cable is mainly used in measurement and automation applications such as temperature, pressure, flow, level switches, and power supplies. Its main purpose is to provide reliable, high-performance connectivity between measurement and control devices and systems.

At the core of these cables is stranded, plain-annealed copper conductor which ranges from 7 AWG (American Wire Gauge) to 28 AWG. This base conductor can then be insulated with a polyvinyl chloride (PVC) dielectric of various colors. Above this is then a single insulation jacket composed of PVC, polyethylene (PE) and a filler. The overall diameter of this jacket ranges from 0.065 inches to 0.185 inches.

The 8502 010100 is specifically designed to operate as part of a measurement and automation system. The purpose of such a system is to provide an accurate and reliable connection between the electrical components or apparatuses from different systems. In order to achieve that, these cables must have low impedance and a wide range of transmission frequencies. The impedance of the 8502 010100 is typically less than 5 ohms, while the transmission frequency may range from 4 Hz to 500 MHz depending on the conductor size.

The 8502 010100 has a wide range of applications, however, some of its most frequent uses can be found in power supply systems, level switches, sensors, temperature and pressure measurement, flow controls, and pumps. Additionally, these cables can be used in test systems, failure detection systems, and data acquisition systems.

When it comes to working principle, the 8502 010100 cables carry out their purpose by using low ohmic and capacitance characteristics. This is achieved by using stranded copper conductor and dielectric insulation to provide a good balance of impedance, capacitance, dielectric withstand and temperature rating. The stranded conductor serves to reduce the impedance of the conductor due to interaction with the surrounding insulation and also helps reduce the capacitance of the cable.

In conclusion, the 8502 010100 Single Conductor Cables (Hook-Up Wire) are highly effective and reliable wire type used in measurement and automation applications. They provide an accurate and reliable connection between electrical components or appratuses from different systems. Additionally, they are designed with low ohmic and capacitance characteristics for a wide range of applications from power supply systems to test systems and failure detection systems.

The specific data is subject to PDF, and the above content is for reference