85F1R5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most popular components used in today’s electronic circuit designs. Commonly abbreviated as THR, through-hole resistors are an important part of many types of electrical devices and are most commonly used in electrical and electronic circuit design. THR is usually composed of a two-pin resistor package that is used to provide electrical resistance between two points in a circuit.

The 85F1R5 application field is mainly used in power regulation. It is one of the most popular components used in power systems for controlling power and managing power levels in a circuit. It is most often used for power regulation in applications such as: AC/DC power interventions, battery charging and power management systems.

The working principle of THR is based upon the principle of “Ohm’s Law”. This law states that the voltage (V) measured across a resistor in a given circuit is proportional to the current (I) flowing through that resistor. Specifically, for a given resistance (R) measured in Ohms, a current of one Ampere will generate a voltage of R Ohms across it. This voltage will cause a fixed amount of energy to be dissipated by the resistor as heat. The resistor works by absorbing and dissipating energy quietly in the circuit.

THR are available in several different configurations. The two most popular package types are the through-hole and surface-mount packages. The through-hole package is the type most commonly used in power systems where it is required to provide a large current or high voltage rating. A through-hole package is composed of two pins that are inserted through the printed circuit board (PCB) and soldered to the opposite side. Surface-mount packages are smaller and require a more intricate and involved process to install.

Aside from the packages, THR may also come in various resistance levels ranging from 1 ohm to several megohms with wattage ratings ranging from 0.125W to 2.00W. The wattage level is dictated by the application, with higher wattage levels indicating higher power availability. The wattage level can also dictate the type of resistor needed, such as a carbon or metal film type.

The 85F1R5 is typically used for power regulation applications and provides high stability and accuracy. It features a low temperature coefficient of less than 5ppm, which ensures that the resistor will not fluctuate significantly with temperature changes. It also features a high degree of tolerance, with some models offering a tolerance of ±1%.

THR are an important part of many types of electrical designs and are used in a wide range of applications. The 85F1R5 is an example of a popular THR and is used mostly for power regulation purposes. Its high stability and accuracy, along with its low temperature coefficient, make it ideal for most applications.

The specific data is subject to PDF, and the above content is for reference