8628 060500 Cables, Wires

Series:	--
Part Status:	Active
Cable Type:	Multi-Conductor
Number of Conductors:	7
Wire Gauge:	14 AWG
Conductor Strand:	19/27
Conductor Material:	Copper, Tinned
Jacket (Insulation) Material:	Poly-Vinyl Chloride (PVC)
Jacket (Insulation) Diameter:	0.623" (15.82mm)
Shield Type:	--
Length:	500.0' (152.4m)
Jacket Color:	Chrome
Operating Temperature:	-20°C ~ 80°C
Jacket (Insulation) Thickness:	0.0600" (1.524mm)
Conductor Insulation:	Poly-Vinyl Chloride (PVC)
Shield Material:	--
Shield Coverage:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Multiple Conductor Cables Multiple conductor cables, also known as multi-conductor cables, are cables with a multiple of conductors within a single cable. These cables are wired in a way that each conductor or wire is individually insulated from the other conductors within the cable. This arrangement allows many signals or circuits to be sent at the same time within a single cable, thus eliminating the need for many different cables.The application of multi-conductor cables can be found in many different areas such as wiring harnesses for cars and boats, alarm systems, industrial control systems, and ethernet or telephone networks. In addition to this, multi-conductor cables are commonly found in audio and video systems where they are used to supply multiple signals at the same time. The most common type of multi-conductor cable is the 8628 060500, also referred to as the ribbon cable. These cables consist of two parallel layers of insulation that are wrapped around a single conductor. They are usually soldered into place and provide good flexibility and better insulation than other types of cables. The working principle of the 8628 060500 is based upon alternating current, also known as AC. This type of current is composed of a wave of alternating polarity, meaning that the current will flow in one direction then switch and flow in the opposite direction many times a second. The waveform produced by this alternating current is a sinusoidal wave, which is what is used to pass the electrical signals through the multi-conductor cable.Each conductor of the 8628 060500 carries one of the current’s sinusoidal waves and the coupling of the two waves produces an interference between the two signals. This interference can cause the signals to become distorted or undesired sounds or images, dependent on the type of signals being sent. To prevent this type of interference, the conductors must be properly spaced and insulated from each other, thus providing better signal quality and clarity.Multi-conductor cables, like the 8628 060500, are important for carrying multiple signals or circuits within a single cable, thus eliminating the need for many separate cables. They are commonly found in audio and video systems, telephone and ethernet networks, industrial control systems, and wiring harnesses for cars and boats. The working principle of multi-conductor cables is based upon alternating current, and each conductor carries one of the sinusoidal waves, which creates an interference between the two signals. It is important for the conductors to be properly spaced and insulated from each other in order to prevent any signal distortion or unwanted sound or images.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description