86912.35.10 Cables, Wires

Jacket (Insulation) Diameter:	0.315" (8.00mm)
Shield Type:	--
Length:	250.0' (76.2m)
Jacket Color:	Gray
Ratings:	--
Features:	--
Voltage:	300V
Operating Temperature:	-40°C ~ 90°C
Usage:	--
Jacket (Insulation) Thickness:	0.0300" (0.762mm)
Conductor Insulation:	--
Shield Material:	--
Shield Coverage:	--
Series:	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	Multi-Conductor
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	2
Wire Gauge:	16 AWG
Conductor Strand:	26/30
Conductor Material:	Copper, Bare
Jacket (Insulation) Material:	Poly-Vinyl Chloride (PVC)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Multiple Conductor Cables: 86912.35.10 Application Field and Working Principle

Multiple Conductor Cables, or MCCs, refer to a type of electronic cable comprised of multiple small conductors, or wires, inside an insulating material. An MCC typically starts at a connector and ends at a connector or terminal block. The number of conductors in the cable depends on its specific configuration and application. Typically, MCCs are used in complex circuitry and require special considerations for proper installation. MCCs are classified by American Wire Gauge (AWG) and National Electrical Code (NEC) ratings to ensure compatibility with the circuit design they are connecting. The AWG rating of a conductor denotes its diameter and is helpful in determining the cable’s current-carrying capacity and build complexity. The NEC rating of the cable is determined by the quality of the insulation used which governs the selection of that cable to safely carry the required electrical power within the circuit.The 86912.35.10 MCC is a two-conductor MCC used for 120 volt circuits. This MCC is rated for 30 amps at up to 75°C (167°F). It is composed of two insulated and hermetically sealed solid conductors, both of which are insulated with a flame-retardant, moisture- and chemical-resistant, polyvinyl chloride (PVC) jacket. The colors of the conductors are red and black, and the material composition of these conductors is copper. The NEC rating of the 86912.35.10 is CL2R and the AWG of each conductor is 12 AWG.MCCs are typically used in a variety of applications with multiple types of devices and electrical components. Common applications for the 86912.35.10 MCC include electrical wiring for lighting fixtures and appliances, signal generators, audio/video setups, as well as general-purpose electrical wiring.The working principle of the 86912.35.10 MCC is based on the electrical conductivity of its two metal conductors. This means that when a current is applied to the MCC, the conductors will transmit the current through the PVC jacket and the insulation material, and ultimately to the corresponding devices connected to the MCC.The 86912.35.10 MCC has been tested and certified by Underwriters Laboratories (UL) in both the U.S. and Canada. Its UL-certified temperature range is -25°C to +80°C (-13°F to +176°F), which makes it suitable for both indoor and outdoor installations. Its UL ratings also ensure that the MCC meets industry safety standards and is reliable for years of reliable service. In general, installation of the 86912.35.10 MCC must follow proper guidelines. It is important to include an adequate number of conductors and the correct type of insulation. It is also important to make sure that the conductors are not twisted, distorted or pinched, as this could create a fire hazard. Additionally, it is important to pay attention to the minimum distance between the two conductors, which is typically 2.5 inches (63.5 mm), and the maximum distance from a potential heat source, which is typically 7 inches (178 mm). Finally, following proper maintenance is critical for assuring the safe and reliable performance of the 86912.35.10 MCC. The MCC must be regularly inspected to make sure that there is no evidence of damage, corrosion, missing insulation, or any other defect that could compromise the safety of the installation. Periodic cleaning is also important to ensure that dirt, grease, oil, and other foreign particles do not collect on the conductors or craftsmanship of the MCC which may hinder its good performance. With the correct application and sufficient maintenance, the 86912.35.10 MCC is a reliable solution for multiple types of electronics applications. By selecting the correct size and rating of this and other MCCs and following proper installation and maintenance guidelines, users can ensure safe and reliable operation of their electronic equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description