87063-040

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs are devices that protect electronic circuits from voltage transients caused by lightning, short-circuit conditions, etc. The 87063-040 is a bi-directional transient voltage suppressor specifically designed to protect against high voltage surges. The device is suitable for both ac and dc applications and is designed to operate in circuits with operating voltages up to 1000V.

The 87063-040 is a 2-terminal Bidirectional Transient Voltage Suppressor (TVS). This TVS contains two symmetrical, bidirectional silicon avalanche diodes back-to-back with a center tap that provides double line-to-line protection as well as line-to-ground protection. The device is capable of supporting surge currents up to 10,000 amps with peak pulse currents up to 12,000 amps.

The 87063-040 can be used as a protection device in various circuit applications. It is primarily used to protect high-power electronic circuits from voltage transients caused by lightning strikes, short-circuit conditions, etc. The device can also be used to protect data and communication lines, as well as AC and DC power Line circuits. As the device is designed to operate in circuits with operating voltages up to 1000V, it is suitable for high-voltage surge protection applications.

The 87063-040\'s working principle is simple. When the applied voltage exceeds the device\'s breakdown voltage, a current flows through it. This current increases exponentially until it reaches the peak pulse current rating of the device. At this point, the device triggers and protects the circuit from further damage.

When the transient current passes through the 87063-040, the device absorbs the current and regulates it, limiting the voltage on the protected circuit. This eliminates the need for expensive fuses or circuit-breakers, and is more reliable than other forms of voltage protection. The device also restores itself after the transient is over, allowing it to be reset and ready for the next transient.

The 87063-040 is an effective protection device that provides reliable protection against high-voltage surges. It is an easy-to-install, reliable, and cost-effective device that can protect both AC and DC circuits. The device can be used in a variety of applications, from data and communication lines to power line circuits, making it an ideal choice for surge protection.

The specific data is subject to PDF, and the above content is for reference