88916-119

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane Connectors – Housings are electrical connectors that are used to link an electrically conductive pathway between electronic equipment. The 88916-119 connector is a perfect choice for high-density applications with hundreds of signal connections and is a three-piece modular connector offering substantial cost savings over similar systems. It provides reliable connection for signal and power applications and can be used on both backplanes and PCBs. It has excellent retention forces, vibration and shock resistance and is well suited for high-speed communication.

This connector system consists of a backplane connector housing, backplane bus bars, PCB board-mount contacts and a mating cable assembly. The backplane connector housing has two mechanical components: a metal housing and a plastic insert. The metal housing provides mechanical alignment for the backplane bus bars and PCB board-mount contacts and also serves as an electrical shield to reduce the interference of electric signals. The plastic insert engages with the backplane bus bars and board-mount contacts to ensure proper connection and also offers shock and vibration protection.

The 88916-119 backplane connector uses two types of backplane bus bars – standard and latching – to secure the connection of a board-mount contact. The standard backplane bus bar slips into the backplane connector housing and is locked in place by a retention clip on the side or end of the housing. The latching backplane bus bar is connected to the board mount contact and slides into the backplane connector housing and is secured with a lock latch. The connection of the backplane bus bar to the board mount contact is dependent on the type of locking latch that is used.

The PCB board-mount contacts are precision-machined components that are press-fit into a prepared PCB board. The posts of the board-mount contacts are inserted into the plastic insert of the backplane connector housing which provides an electrical connection between the contact post and the backplane bus bars. The 88916-119 board-mount contacts are designed for hundreds of signal connections, and their design allows a greater number of connections in a much smaller space than other connectors.

The mating cable assembly connects the 88916-119 backplane connector to the PCB. The cable assembly consists of wires that are soldered to the board-mount contacts and a cable assembly end that connects to the backplane connector. The cable assembly is typically covered with a cable strain relief to ensure that the connections remain secure.

The 88916-119 backplane connector is ideally suited for applications where hundreds of signal connections are required in a small space. This type of connector is reliable, easy to install and provides excellent retention force, vibration and shock resistance. With its cost savings over similar systems and its superior performance, this connector is the choice for high-density applications.

The specific data is subject to PDF, and the above content is for reference