Allicdata Part #: | 563-1729-ND |
Manufacturer Part#: |
8GA2014-Z |
Price: | $ 5.62 |
Product Category: | Switches |
Manufacturer: | Nidec Copal Electronics |
Short Description: | SWITCH TOGGLE DPDT 6A 125V |
More Detail: | Toggle Switch DPDT Through Hole, Right Angle |
DataSheet: | 8GA2014-Z Datasheet/PDF |
Quantity: | 84 |
1 +: | $ 5.10930 |
10 +: | $ 4.97763 |
25 +: | $ 4.84294 |
50 +: | $ 4.57393 |
100 +: | $ 4.43942 |
250 +: | $ 4.30492 |
500 +: | $ 3.63227 |
1000 +: | $ 3.49773 |
Specifications
Illumination Type, Color: | -- |
Electrical Life: | 50,000 Cycles |
Actuator Material: | -- |
Operating Temperature: | -20°C ~ 85°C |
Features: | Washable |
Ingress Protection: | -- |
Bushing Thread: | Unthreaded |
Panel Cutout Dimensions: | -- |
Termination Style: | PC Pin |
Mounting Type: | Through Hole, Right Angle |
Illumination Voltage (Nominal): | -- |
Series: | 8GA |
Illumination: | Non-Illuminated |
Actuator Length: | 10.50mm |
Actuator Type: | Standard Round |
Voltage Rating - DC: | 30V |
Voltage Rating - AC: | 125V |
Current Rating: | 6A (AC), 4A (DC) |
Switch Function: | On-On |
Circuit: | DPDT |
Part Status: | Active |
Packaging: | Bulk |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to 8GA2014-Z Toggle Switch
The 8GA2014-Z is an electrical component of a toggle switch. This type of switch is an override switch that is used in a variety of applications that require the user to reset the switch after an interruption. It is also used to override automatic functions of a device to allow the user to manually control them.The 8GA2014-Z toggle switch is commonly found in industrial, automotive, and electronic applications. It has a five pins configuration, and a single-pole double throw (SPDT) configuration with a center off position. The switch is designed to handle currents of up to 16 Amps and comes in three different voltage ranges of 10-250VAC, 10-125VDC, and 0.4-110VDC. The electrical connections of the switch are made with screws, and each pin has a male or female termination of varying size.How does a 8GA2014-Z Toggle Switch Work?
The 8GA2014-Z is a simple switch type and works by being either switched ON or OFF, depending on whether the lever is in the "up" or "down" position. When in the "up" position the switch is ON, while in the "down" position the switch is OFF. This means the switch must be manually reset each time it is used, which makes it particularly useful in situations where an emergency over ride is necessary.When the switch is ON, current flows through the switch and out the lower terminals. When the switch is in the OFF position, no current is allowed to flow through the switch. The electrical connections of the switch are made with screws, and each pin has a male or female termination of varying size.Common Uses for 8GA2014-Z Toggle Switches
The 8GA2014-Z toggle switch is commonly used in applications that require a manual override of automated functions or a reset of the switch. The switch is used in industrial, automotive, and electronic applications, and is particularly useful in applications that require emergency resetting due to an interruption in power or signal.The switch is used in a variety of applications, from security systems to HVAC controls. It is also used to manually control the power supply to motors, pumps, lights, and electrical loads. The switch is also used for switching between different applications of a device, such as selecting between heating or cooling modes of a HVAC system.Safety Precautions for 8GA2014-Z Toggle Switches
Safety is paramount when using the 8GA2014-Z toggle switch, and there are certain precautions to take when installing and using this switch. First, it is important to ensure that the switch is installed correctly according to standards and manufacturer instructions. It is also important to properly identify the type of connection, as the wrong type of connection may cause the switch to malfunction or cause damage.The switch should only be used for the specified voltage and current ratings, as overloading the switch may cause it to malfunction or be damaged. The current carrying parts of the switch should not be accessible to avoid injury, and the switch should be insulated properly to protect it from electrical shock or fire. Finally, regular maintenance and inspection of the switch should be done to ensure it is working properly.Conclusion
The 8GA2014-Z is a type of toggle switch that is used in a variety of applications where manual resetting or overriding of automated functions is required. The switch is designed to handle currents of up to 16 Amps and comes in three different voltage ranges. The switch is commonly used in industrial, automotive, and electronic settings, and should be installed and used according to manufacturer instructions to ensure proper use and safety.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "8GA2" Included word is 5
Part Number | Manufacturer | Price | Quantity | Description |
---|
8GA2016-Z | Nidec Copal ... | 7.15 $ | 36 | SWITCH TOGGLE DPDT 6A 125... |
8GA2024-Z | Nidec Copal ... | 6.04 $ | 65 | SWITCH TOGGLE DPDT 6A 125... |
8GA2012-Z | Nidec Copal ... | 3.47 $ | 214 | SWITCH TOGGLE DPDT 6A 125... |
8GA2022-Z | Nidec Copal ... | 4.0 $ | 319 | SWITCH TOGGLE DPDT 6A 125... |
8GA2014-Z | Nidec Copal ... | 5.62 $ | 84 | SWITCH TOGGLE DPDT 6A 125... |
Latest Products
P2022B/UC
SWITCH TOGGLE DPDT 10A 125VToggle Switch...
P2012BP/C
SWITCH TOGGLE SPDT 10A 125VToggle Switch...
31AT241-P
SWITCH TOGGLEToggle Switch
M2018KS1W01
SWITCH TOGGLE SPDT 6A 125VToggle Switch ...
AML23GBE2CA03
SWITCH TOGGLE DPDT 3A 125VToggle Switch ...
AML25FBF2CA05YX
SWITCH TOGGLE DPDT 3A 125VToggle Switch ...