8N3Q001EG-0140CDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators are perhaps the most widespread forms of synchronization utilized in modern engineering designs. They are useful for a wide range of functions, including accurate clock generation, frequency measurement and digital signal processing. The 8N3Q001EG-0140CDI8 is an example of such a synchronized timing device.

The 8N3Q001EG-0140CDI8 is an integrated circuit (IC) programmable clock oscillator that provides a stable reference timing signal at a very low power consumption. It is based on a CMOS technology and designed to operate from a wide range of supply voltages, from 3.3V to 5V. It has two independent programmable outputs and can be programmed to generate outputs of frequencies ranging from 10KHz to 35MHz. It also has the ability to generate a large variety of waveforms like sine waves, square waves, triangle waves, and other waveforms.

The 8N3Q001EG-0140CDI8 provides three user-programmable options for configuring the output frequency and waveform. These are through an internal register, an external register, or a pin-programmable frequency and output waveform selector. The external register is connected to an external timing source, allowing frequency selection and waveform selection to be made. The internal register is programmed with data values that have been stored in onboard SRAM while the pin-programmable frequency and output waveform selector allows the output frequency and waveform to be easily changed with a few external components.

The 8N3Q001EG-0140CDI8 works by generating a clock signal on its output pins. This clock signal is then used to synchronize different devices within the system, allowing them to function in unison. This makes it ideal for multi-device designs, such as those used in embedded systems. The 8N3Q001EG-0140CDI8 also allows multiple clocks to be generated from a single input, allowing for synchronization of multiple devices within the system. Its flexible and low-power design make it the perfect solution for multi-device systems that require precise timing or logic development.

In addition to its wide range of clock outputs, the 8N3Q001EG-0140CDI8 is equipped with a phase-locked loop (PLL) circuit. A PLL is a circuit that locks an oscillator to an external frequency reference, so that the output of the oscillator is locked to the input frequency. This allows the IC to accurately generate an output signal with a frequency that is very close to the input signal, regardless of temperature or power supply fluctuations. The PLL also eliminates the need for an external oscillator, further decreasing power consumption.

In summary, the 8N3Q001EG-0140CDI8 is a versatile integrated circuit programmable clock oscillator. It is specifically designed for use in embedded systems and can be used to generate precise signals over a wide range of frequencies with very low power consumption. Its phase-locked loop circuitry provides an accurate reference signal, making it suitable for precise synchronization of multiple devices in the same system. This makes it a great choice for applications that require precise frequency and waveform generation.

The specific data is subject to PDF, and the above content is for reference