8N3QV01EG-1129CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators are devices designed to output digital pulse width modulation (PWM) signals to switch devices on and off in a complex, cyclical manner. The 8N3QV01EG-1129CDI is a programmable frequency divider and timer that is used for controlling the timing of multiple devices over a wide range of applications. It features a three channel divided output and adjustable duty cycle yields from 2-99%. This timer and oscillator is ideal for applications such as generating PWM signals for frequency conversion and speed control or for producing pulse-width pulse-rate modulation for controlling switching power supplies. It is also used for controlling industrial process automation systems.

The 8N3QV01EG-1129CDI programmable frequency divider and timer uses a low-noise quartz crystal oscillator that provides accuracy of ±20ppm. It is designed with a quartz crystal oscillator combined with divider stages to produce the desired frequency output. The divider consists of multiple stages which vary the frequency by a factor of the divisor. Each divider stage is provided with a synchronization control to change the divisor to match the desired frequency. This is done by either increasing or decreasing the divider value.

This programmable timer and oscillator is made up of a series of linear digital logic gates and counters, enabling it to produce a variety of pulse widths. It can be programmed to produce a pulse width of from 1µs to 2ms. The 8N3QV01EG-1129CDI also features adjustable duty cycles, which allow for a range of frequencies and pulse widths to be outputted. The duty cycle is a measure of on-time compared to the total cycle time.

The 8N3QV01EG-1129CDI programmable frequency divider and timer can be used in a wide range of applications where precise timing and controls are required. It is ideal for controlling the frequency in power conversion systems, lighting systems, motor control applications, medical monitoring and process automation systems. It is also used in communications networks, robotics and factory automation systems.

In summary, the 8N3QV01EG-1129CDI programmable frequency divider and timer is a versatile control device designed to provide precise digital pulse width modulation (PWM) signals to switch devices in a complex, cyclical manner. It is suitable for applications such as regulating frequency and power conversion, motor control, medical monitoring and communications networks. Furthermore, it is made up of a series of linear digital logic gates and counters, which enable it to produce a variety of pulse widths, adjustable duty cycles and frequencies.

The specific data is subject to PDF, and the above content is for reference