8N4SV75BC-0016CDI

Series:	FemtoClock® NG
Packaging:	Tray
Part Status:	Active
Type:	VCXO
Count:	--
Frequency:	100MHz
Voltage - Supply:	2.375 V ~ 2.625 V
Current - Supply:	136mA
Operating Temperature:	-40°C ~ 85°C
Package / Case:	6-CLCC
Supplier Device Package:	6-CLCC (7x5)
Mounting Type:	Surface Mount
Base Part Number:	IDT8N4SV75BC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 8N4SV75BC-0016CDI is an integrated programmable oscillator with a highly-accurate frequency synthesis capability. It provides programmable frequency, phase and duration control, with a resolution of 0.1ppm (parts per million) over a frequency range of 10-30MHz. The 8N4SV75BC-0016CDI can be used in applications such as frequency synthesizers, embedded clock generation dividers, clock jitter cleaning and noise reduction, and other time-critical applications. This device is manufactured in a 8-pin plastic TSSOP package, and features a power consumption of 1.5mA at 3.3V. It is designed to operate over a temperature range of 0°C to 70°C, and is rated for 100mW of power dissipation. The 8N4SV75BC-0016CDI is a programmable oscillator integrated circuit (IC) which can be configured for high-speed clock and timing applications. It provides a wide range of on-chip programmable frequency, phase, and duration control with a resolution of 0.1ppm. It can generate output frequencies from 10 to 30 MHz.The 8N4SV75BC-0016CDI can be used to produce accurate and stable clocks, most notably in frequency synthesis applications and dividers. It can be used as a clock generator in communications, networking, and other high-speed data applications, where there is a need to provide clocking signals with fast transition times and low jitter and noise.The 8N4SV75BC-0016CDI includes a Temperature-Compensated Crystal Oscillator (TCXO) for precise frequency synthesis and control. It also includes a particular type of low-jitter programmable Digital Frequency Synthesizer (DFS). This DFS allows the user to program precise frequencies from 10 - 30 MHz which is parameterized by the specified frequency and a single programming bit. This device also provides a programmable jitter cleaning (PJC) function, which is a key feature for signal integrity and noise control. PJC reduces the jitter at the output signal of the 8N4SV75BC-0016CDI by up to 24dB. The PJC allows for precise control even in the presence of unwanted frequency fluctuations, which would normally cause distortions, jitters, or a loss of signal integrity. In addition, the 8N4SV75BC-0016CDI contains an Input Monitor function, which allows for monitoring of the device’s internal voltage levels, and enables the user to fine-tune their frequency synthesis configurations to ensure optimal results. The 8N4SV75BC-0016CDI supports two types of control lines: a three-wire interface for controlling the frequency/phase/duration settings, and an asynchronous control terminal for setting and reading the frequency/phase/duration configuration. The asynchronous control terminal is used to access Remote Frequency Programming mode, which allows for the 8N4SV75BC-0016CDI to be programmed either via a serial interface or an external resistor. Overall, the 8N4SV75BC-0016CDI is a highly-accurate, low-power programmable oscillator which is well-suited for applications requiring precise clock and timing control. Its features, such as small form factor, low power consumption, high frequency range, and programmability, make it a valuable asset in any application requiring precise clock/timing control and synthesis. With its wide range of features, it is becoming increasingly popular in fields such as medical, aerospace, telecommunications, and automotive.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description