8N4SV75LC-0180CDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 8N4SV75LC-0180CDI8 is a programmable timer and oscillator device designed for use in a wide variety of applications. The 8N4SV75LC-0180CDI8 has an integrated oscillator and counter circuits, which enable it to be adapted to meet a range of timing tasks. The device can be programmed to perform single-shot timing jobs, repetitive tasks, and more complex functions, such as pulse-width modulation (PWM) and frequency modulation ( FM), thanks to its parameterized configuration.

The 8N4SV75LC-0180CDI8 has a versatile design that allows it to be adapted to different applications. It features two timer/oscillator slots with programmable frequency and period. These can be set to provide precise timing in each circuit, even when operating on different frequencies. The device also includes a pair of pulse selectors, which allow it to be programmed to generate either single-shot or repetitive operation at the desired frequency. A pair of programmable outputs are available to control the external circuits, with an additional fourth output to be used for synchronization or to provide an indication. Additionally, the timers for each circuit can be programmed independently so their operations can remain synchronized regardless of the external operations. This allows the 8N4SV75LC-0180CDI8 to be used in synchronization tasks, where the two timer fictions need to remain in sync despite the external operations.

The 8N4SV75LC-0180CDI8 contains an integrated control register, which provides the internal registers used for programming these positions sequentially. The control register contains three registers - the run-time register, the period register, and the start/stop register. The run-time register contains data for the programmed time period, while the period register contains data for the programmed frequency. The start/stop register contains data for determining when the timer/oscillators should be enabled or disabled. The programming is done by writing the desired data into these registers before sending a start/stop command to enable or disable the timers/oscillators.

The 8N4SV75LC-0180CDI8 includes an integrated temperature sensing circuit, which allows the device to respond to changes in temperatures of the environment. This can be used to improve accuracy and reliability when operating in high-temperature applications. The device also includes a test pin configurable input, which can be used to test the accuracy of the timers/oscillators. Additionally, the device includes an active power down mode, which reduces power consumption when operating in low-power applications.

The 8N4SV75LC-0180CDI8 offers several configurable options to accommodate different applications. The device can be configured to operate in single-shot timing mode, or switched between single-shot timing and continuous frequency modulation (FM) mode. It can also be set to operate in pulse-width modulation (PWM) mode. The PWM mode allows the user to program the duty cycle, which can be used to adjust the output voltage of the pulse signal. Additionally, the device supports the programming of calibration parameters to correct for any device inaccuracies.

The 8N4SV75LC-0180CDI8 can be used in a wide range of applications, including automatic shutdown systems, pulse width modulation, and frequency modulation. It can also be used as a power supply controller and timer, as well as a signal generator, signal amplifier and mixers. The device is a compact, cost-effective solution compared to more expensive traditional frequency synthesizers, while the flexible design allows it to be customized to meet a variety of specific needs.

The specific data is subject to PDF, and the above content is for reference