8N4SV75FC-0106CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators are electronic components used for timekeeping and timing purposes. They provide accurate, repeatable timing signals for a variety of applications. In this article, we will discuss the 8N4SV75FC-0106CDI and its application field and working principle.

The 8N4SV75FC-0106CDI is an ultra-low jitter Digital Controlled Oscillator (DCO). It has a Frequency Control Pin (FCP) which allows it to be programmed to the desired frequency, ranging from 16.2MHz up to 375MHz. The frequency range can be adjusted in 0.01% increments over a wide dynamic range with a Fast Control Characteristics of ±50ppm over a temperature range of -40°C to 85°C and supply voltage of 1.8V to 3.3V. It is also capable of receiving a wide range of control voltages varying from 0.5V to 4.5V. Its ultra-low jitter combined with its output can be programmed to provide the most stable timing in systems.

The 8N4SV75FC-0106CDI application fields include but are not limited to clocks and timing, broadcasting and point-to-point communication, embedded systems and sensors, high-speed digital data processing, and reference clock and jitter attenuation applications.

The principle of operation for the 8N4SV75FC-0106CDI is relatively simple. It takes in a signal from the external control voltage and compares it to an internal reference voltage. Then, based on the measured voltage, the chip adjusts its output frequency. The chip is also able to perform frequency multiplication and division, allowing it to achieve high-speed signal processing.

In summary, the 8N4SV75FC-0106CDI is a Digital Controlled Oscillator with an FCP that allows it to be programmed to frequencies ranging from 16.2MHz to 375MHz. It has a wide range of applications in the fields of clocks and timing, broadcasting and point-to-point communication, embedded systems and sensors, high-speed digital data processing, and reference clock and jitter attenuation applications. Lastly, its principle of operation is based on comparison of a signal from the external control voltage to an internal reference voltage, which then adjusts its output frequency based on the measurement.

The specific data is subject to PDF, and the above content is for reference