9001-12-10

Turn Off Voltage (Min):	1 VDC
Coil Resistance:	1 kOhms
Coil Power:	--
Contact Material:	--
Operating Temperature:	-20°C ~ 85°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	EMI Shielded
Release Time:	0.1ms
Operate Time:	0.35ms
Series:	9000
Turn On Voltage (Max):	9 VDC
Switching Voltage:	200VAC, 200VDC - Max
Contact Rating (Current):	500mA
Contact Form:	SPST-NO (1 Form A)
Coil Voltage:	12VDC
Coil Current:	12.0mA
Coil Type:	Non Latching
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 9001-12-10 Reed Relays

Reed relays, as an important type of switch, are widely used in various electronic circuits. The 9001-12-10 type, also known as “form C” reed switch, is especially popular in many areas due to its small size and versatility. This article will discuss the application field and working principle of this special type of reed relays.

Application Field of 9001-12-10 Reed Relays

The 9001-12-10 reed relays are mainly used in the fields of low level signal circuit switching, remote control system and automatic control system. They can effectively switch various signals in the circuit, helping to control the system. Additionally, due to its small size and low working voltage, it can be widely used in sensors and instrument control circuits. Due to their small size, the 9001-12-10 reed relays can fit into a variety of devices and can be a perfect choice of switch for miniaturized circuits. With a Rated contact resistance of less than 50 milliohms and an insulation resistance of more than 1000 megohms, these types of reed relays can divert large switching currents without damaging or overheating. This makes them a reliable and cost-effective choice for many types of circuits.

Working Principle of 9001-12-10 Reed Relays

The 9001-12-10 reed relay works on the principle of an electromagnet. It consists of an electromagnetic core, a contact element and two miniature coils. When the current flows through one of the coils, the core creates a magnetic field which attracts the contact element. The contact element then closes the circuit, allowing current to pass through the circuit.The 9001-12-10 reed relay is very sensitive to changes in the magnetic field. As soon as the magnetic field is reduced or eliminated, the contact element is released and the circuit is opened. This makes the 9001-12-10 effectively the same as a “normally open” contact switch.

Conclusion

The 9001-12-10 reed relay is a type of switch with a small size and low working voltage. It is widely used in the fields of low level signal circuit switching, remote control system and automatic control system due to its reliability and cost-effectiveness. It works on the principle of an electromagnet, with a contact element that closes the circuit when the current flows through one of the coils. By quickly and efficiently switching various signals in the circuit, it can effectively help to control the system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description