Allicdata Part #: | 904232-2-ND |
Manufacturer Part#: |
904232-2 |
Price: | $ 333.68 |
Product Category: | Tools |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | ANVIL |
More Detail: | N/A |
DataSheet: | 904232-2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 303.34500 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crimpers, Applicators and Presses are essential tools for many industries, especially in the production of goods. Their importance as tools is only heightened when considering that they can be used to perform many more intricate tasks than simply crimping, applying and pressing. A further illustration of their importance is the fact that there are specific parts designed specifically for these tools. One such part is the 904232-2.
The 904232-2 part is an accessory for crimpers, applicators and presses. It is designed to be used with a specific type of product and provides the user with enhanced control when operating the machine. There are some adjustments that can be made to the part depending on the product that it is being used with.
The 904232-2 is usually found on standard crimpers, applicators and presses. Its primary function is to increase the accuracy of the tool. This is done by providing a better grip on the product being worked with. The grip is improved by the installation of a number of different types of springs and adjustable knobs.
In order to use the 904232-2 part, it must first be connected to the machine that it will be used with. This usually means that the part must fit the machine parts that have been pre-attached. After this has been done, the user is then able to adjust the part to the settings that they desire. They can do this by adjusting the position of the spring, the amount of force that it exerts on the product, and other settings.
The effectiveness of the 904232-2 part is greatly dependent on the product that it is being used with. Each product requires different settings in order to ensure that the part is providing the desired results. As such, it is recommended that each product be tested with different settings to find the correct settings. This will ensure that the part is providing the most accurate results.
The 904232-2 part can be used for both small and large products. It is designed for relatively easy installation and can be used with almost any crimper, applicator, and press. Additionally, it is designed to provide a secure and reliable grip, making it essential for those who are working with materials that require precise results.
In conclusion, the 904232-2 part is an essential accessory for crimpers, applicators and presses. It provides users with enhanced control when working with products and is suitable for both small and large products. Furthermore, its adjustable knobs and springs make it possible to adjust the settings for different products, thus ensuring the most accurate results. As such, it is an essential accessory for any production process.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
C702 10M008 9042 | Amphenol Sin... | 65.85 $ | 1000 | CONN SMART CARD PUSHMATIC... |
9042M6FBR99X90X | Conec | 0.0 $ | 1000 | 42+6 F TYPE M DIN41612 PC... |
MB90F023PF-GS-9042 | Cypress Semi... | 17.68 $ | 1000 | IC MCU MICOM FLASH 100QFP... |
904234-1 | TE Connectiv... | 164.35 $ | 1000 | PLATE REAR SHEAR |
904262-1 | TE Connectiv... | 88.55 $ | 1000 | BLOCK, PIVOT |
904274-1 | TE Connectiv... | 0.69 $ | 1000 | DEPRESSOR |
904232-1 | TE Connectiv... | 333.68 $ | 1000 | ANVIL |
904232-2 | TE Connectiv... | 333.68 $ | 1000 | ANVIL |
904220-1 | TE Connectiv... | 333.68 $ | 1000 | ANVIL, COMBINATION |
904273-1 | TE Connectiv... | 340.96 $ | 1000 | DEPRESSOR MOUNT |
904222-3 | TE Connectiv... | 505.2 $ | 1000 | STRIPPER WIRE |
904222-1 | TE Connectiv... | 281.71 $ | 1000 | STRIPPER WIRE |
904240-1 | TE Connectiv... | 1.39 $ | 1000 | 626 CYLINDER ASSEMBLY |
904252-1 | TE Connectiv... | 407.48 $ | 1000 | CRIMPER, INSULATION SPECI... |
9042260000 | Weidmuller | 48.94 $ | 1000 | SDI S 3-6 5/PH1/2 RED-L 1... |
9042270000 | Weidmuller | 0.0 $ | 1000 | SD S 3-6 5/PH1/2 RED-L 1=... |
9042280000 | Weidmuller | 0.0 $ | 1000 | SD S 3-6 5/PZ1/2 RED-L 1=... |
9042 | Radial Magne... | 0.25 $ | 6771 | MAGNET CYLINDRICAL NDFEB ... |
9042110000 | Weidmuller | 10.84 $ | 1000 | SCREWDRIVER SLOTTED 0.6X3... |
9042100000 | Weidmuller | 6.7 $ | 1000 | SCREWDRIVER SLOTTED 0.5X3... |
9042010000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER SLOTTED 1X5.5... |
9042020000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER SLOTTED 0.8X4... |
9042030000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER SLOTTED 0.6X3... |
9042040000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER PHILLIPS #1#1... |
9042050000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER PHILLIPS #2#2... |
9042060000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER PHILLIPS #1#1... |
9042070000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER PHILLIPS #2#2... |
9042080000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER POZIDRIV #3#3... |
9042090000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER TORX T40T40 T... |
9042170000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER PHILLIPS #3#3... |
9042180000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER PHILLIPS #1#1... |
9042190000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER PHILLIPS #2#2... |
9042200000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER PHILLIPS #3#3... |
9042210000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER TORX T30T30 T... |
9042220000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER TORX T25T25 T... |
9042230000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER TORX T20T20 T... |
9042240000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER TORX T15T15 T... |
9042250000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER TORX T10T10 T... |
9042290000 | Weidmuller | 0.0 $ | 1000 | SCREWDRIVER TORXTorx Scre... |
RETAINER PLATE/STRIP CUTOFF
GAGE PIN ASSEMBLY
LOCATOR MINI EJECTOR
MEP-6T TOUCH SCREEN/MESSAGE SYST
SEATING TI ASSEMBLY
INSET TL ASSY 5 PR 14 COLUMN