Allicdata Part #: | 90J2R4E-ND |
Manufacturer Part#: |
90J2R4E |
Price: | $ 2.21 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 2.4 OHM 11W 5% AXIAL |
More Detail: | 2.4 Ohms ±5% 11W Through Hole Resistor Axial Flame... |
DataSheet: | 90J2R4E Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 2.00880 |
Series: | 90 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 2.4 Ohms |
Tolerance: | ±5% |
Power (Watts): | 11W |
Composition: | Wirewound |
Features: | Flame Retardant Coating, Safety |
Temperature Coefficient: | ±100ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.343" Dia x 1.811" L (8.70mm x 46.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are one of the most widely used passive components in the industries today, due to their low cost and wide availability. The 90J2R4E application field is one of the most common types of passive components used in the industry. It is an axial-leaded type resistor with a power dissipation capability of 0.63 watt and a voltage rating of 100 volts.
These types of resistors are primarily used in power management and electronic circuits for circuit regulation and load balancing. In power management systems, the 90J2R4E is often used as an energy compensator to dissipate excess energy, which helps to stabilize the output voltage. It is also used as an anti-surge resistor to protect against surges caused by inductive loads or overvoltage situations.
The working principle behind the 90J2R4E Through Hole Resistor is based on the resistance principle of Ohm’s law. It works by passing a current through two points, forming an electrical circuit. The voltage across the two points is then equal to the resistance of the resistor, which defines the type of resistor. The different types of resistors, such as the wirewound resistors, the varistors, and the varistors, all work on the same principle of resistance.
The axial-leaded type resistors are available in different wattage ratings and voltage ratings, depending on the different applications. The wattage rating determines the amount of energy the resistor can handle before it becomes damaged, while the voltage rating indicates the maximum amount of voltage that a particular resistor can handle before it overheats or breaks.
The 90J2R4E Through Hole Resistor has a long life expectancy and is usually designed for long-term service. Its heat resistance and overload protection features make it ideal for the most extreme environmental conditions. It has the temperature coefficient of resistance and ability to operate under high-temperature environments, making it a good choice for use in appliances, automobiles, and industrial electronic equipment.
The 90J2R4E Through Hole Resistor is relatively easy to install and requires minimal maintenance. Additionally, since the components are resistive in nature, it is very hard to damage them. The 90J2R4E is also one of the most affordable resistors available. This makes it an ideal choice for applications where cost is an important factor.
In summary, the 90J2R4E Through Hole Resistor is used widely in the industry for a variety of applications. It is a cost-effective solution with a long life expectancy and can be used in the most extreme environmental conditions. Its working principle is based on the resistance principle of Ohm’s law and is easily installed with minimal maintenance required.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
90J2R0E | Ohmite | 2.21 $ | 1000 | RES 2 OHM 11W 5% AXIAL2 O... |
90J2R2E | Ohmite | 2.21 $ | 1000 | RES 2.2 OHM 11W 5% AXIAL2... |
90J2R4E | Ohmite | 2.21 $ | 1000 | RES 2.4 OHM 11W 5% AXIAL2... |
90J2R7E | Ohmite | 2.21 $ | 1000 | RES 2.7 OHM 11W 5% AXIAL2... |
90J22R | Ohmite | 2.21 $ | 1000 | RES 22 OHM 11W 5% AXIAL22... |
90J240 | Ohmite | 2.21 $ | 1000 | RES 240 OHM 11W 5% AXIAL2... |
90J24R | Ohmite | 2.21 $ | 1000 | RES 24 OHM 11W 5% AXIAL24... |
90J200E | Ohmite | 2.02 $ | 1000 | RES 200 OHM 11W 5% AXIAL2... |
90J20RE | Ohmite | 2.02 $ | 1000 | RES 20 OHM 11W 5% AXIAL20... |
90J22RE | Ohmite | 2.02 $ | 1000 | RES 22 OHM 11W 5% AXIAL22... |
90J240E | Ohmite | 2.02 $ | 1000 | RES 240 OHM 11W 5% AXIAL2... |
90J24RE | Ohmite | 2.02 $ | 1000 | RES 24 OHM 11W 5% AXIAL24... |
90J250E | Ohmite | 2.02 $ | 1000 | RES 250 OHM 11W 5% AXIAL2... |
90J270E | Ohmite | 2.02 $ | 1000 | RES 270 OHM 11W 5% AXIAL2... |
90J27RE | Ohmite | 2.02 $ | 1000 | RES 27 OHM 11W 5% AXIAL27... |
90J2K4E | Ohmite | 2.57 $ | 1000 | RES 2.4K OHM 11W 5% AXIAL... |
90J2K2E | Ohmite | 2.57 $ | 1000 | RES 2.2K OHM 11W 5% AXIAL... |
90J2K0E | Ohmite | 2.57 $ | 1000 | RES 2K OHM 11W 5% AXIAL2 ... |
90J25RE | Ohmite | 3.03 $ | 1019 | RES 25 OHM 11W 5% AXIAL25... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...