90J5R1E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors, such as 90J5R1E, are a type of component found in most household electronics. They’re used in converters, amplifiers, and many other circuits. Let’s delve deeper into their application field and working principle.

Application Field

Through hole resistors, including 90J5R1E, typically have a resistance value of 5 ohms but its resistance is fixed and unchangeable. Through hole resistors can be used in monitoring and controlling circuits, for signal processing, and in high-power devices like electric motors. Generally, resistors are used to reduce voltage drop across a circuit and dissipate excess heat, thus preventing components from overheating.

In audio-video devices, 90J5R1E resistors are used to regulate the input voltage to be of a specific required level. They can also be used for impedance matching, RF bypassing, and establishing reference points in a network. Resistors are also used to control current and voltage in active circuits.

Working Principle

90J5R1E\'s 4 wires are connected to the PCB at intervals. The wire gauge is determined based on the amount of current flow it should be able to handle. A large gauge can handle more current than a small one. The wire must be strong in order to resist any external mechanical force.

The resistor works by passing a current through and experiencing resistance based on its ohmic value. This resistance converts electrical energy into thermal energy and thus dissipates the excess heat produced by the circuits.

To understand this further, imagine a glass of water. If you fill it with too much water, it will start overflowing. In a similar way, in a circuit, if you feed it with too much current, the circuit may experience a short circuit and can get damaged. As a countermeasure, the resistor combines with some other components and provides resistance. This limits the amount of current which can flow through it, and, in turn, eventually reduces power loss and dissipates excess heat.

So, to sum it up, 90J5R1E through hole resistors are used for voltage & current regulation in active circuits, for impedance matching, RF bypassing, and various other electronic activities.

The specific data is subject to PDF, and the above content is for reference