910008

Series:	--
Packaging:	Bulk
Part Status:	Active
Number of Channels:	4
Voltage - Isolation:	2500VDC
Current Transfer Ratio (Min):	--
Current Transfer Ratio (Max):	--
Turn On / Turn Off Time (Typ):	--
Rise / Fall Time (Typ):	--
Input Type:	DC
Output Type:	Transistor
Voltage - Output (Max):	48V
Current - Output / Channel:	100mA
Voltage - Forward (Vf) (Typ):	--
Current - DC Forward (If) (Max):	20mA
Vce Saturation (Max):	--
Operating Temperature:	--
Mounting Type:	DIN Rail
Package / Case:	Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components used for isolating two circuits while allowing them to communicate with each other. Optoisolators are widely used in many different types of applications, ranging from industrial control systems to medical devices. The two main types of optoisolators are transistor, photovoltaic output and the 910008 application field and working principle.Transistor optoisolators consist of an LED light source, a phototransistor, and a base resistor. The LED emits light when it receives power from a control circuit, while the phototransistor responds to the light and converts it into a signal that can be sent to a control circuit. When the phototransistor receives a signal from the control circuit, it then amplifies the signal and sends it back. The control circuit can then take action based on the incoming signal. Transistor optoisolators are commonly used in applications such as motor control, temperature sensing, switching, and signal conditioning. Photovoltaic output optoisolators are two-port devices, in which one port is used for input and the other for output. When the input voltage is applied, the LED inside the optoisolator lights up and emits light. The light can then be detected by the photodiode inside the optoisolator and converted into voltage. This converted voltage is then sent to an output port for control. Photovoltaic output optoisolators are typically used in applications such as door and window sensors, motion detectors, emergency lighting systems, and security systems. The 910008 is a particular type of optoisolator, manufactured by Sunon. This optoisolator is a three-chip component, consisting of an LED, a photodiode, and a transistor amplifier. The 910008 has a high isolation voltage of 5,000V and is primarily used for applications such as security systems, medical equipment, and industrial automation. The working principle of the 910008 is similar to most optoisolators; however, it is capable of higher currents than many other optoisolators.In conclusion, optoisolators are an essential component of many electronic devices and have a wide variety of applications. Optoisolators are available in a number of different types, including transistor, photovoltaic output, and the 910008 application field and working principle. The 910008 is a particular type of optoisolator, featuring a high isolation voltage and is primarily used for security, medical, and industrial automation applications. Through the use of optoisolators, two circuits can be isolated while still communicating with each other, allowing for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description