9129563500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are one of the most reliable and important components in any electrical network. In modern electrical networks, circuit breakers are used to protect electrical systems from damage in the event of over-voltages, under-voltages, equipment failures, and other electrical disturbances. Circuit breakers are designed to automatically close or open an electrical circuit in the event of an abnormal electrical event, such as a short circuit or an overload. The 9129563500 is a type of circuit breaker that is specifically designed for use in energy distribution systems.

The 9129563500 is a type of low-voltage circuit breaker that is designed to interrupt an electrical current when it exceeds a predetermined level. This type of circuit breaker is usually used in electrical systems with three-phase or direct current (DC) power supplies. It is designed to protect equipment and personnel from the damaging effects of power surges or overloads. The 9129563500 can be used in many different applications, including industrial and commercial systems.

The 9129563500 circuit breaker has a main contact, which opens or closes the main switch, and a secondary contact that is designed to open the breaker before the main contact. When the current reaches a predetermined level, the main contact will open and break the circuit, thus preventing an overload or surge from damaging the electrical system. The secondary contact will open before the main contact in order to prevent an overload from damaging the circuit.

The 9129563500 is designed to operate automatically and its operation is based on an electronic timer. The timer is set to a specific time, during which the breaker will open if an overload occurs. Once the overload is cleared, the timer will reset and the breaker will close again. If the overload continues for more than the set time, the breaker will remain open and the circuit will be disconnected.

The 9129563500 is designed to be installed in a variety of applications. It is commonly used in commercial and industrial environments where a large number of electrical circuits need to be protected from electrical faults. In residential applications, the 9129563500 can be used to protect a single circuit, such as a home-lighting circuit. In high voltage applications, the 9129563500 can be used to protect high voltage equipment from overvoltage and overcurrent conditions.

In order to ensure the safety of the 9129563500 circuit breaker, it must be connected to a suitable control panel. The control panel should be designed to meet the specific requirements of the application and the environment in which it is being used. The control panel should be designed to include current and voltage monitors, as well as over-voltage protection,earth leakage protection, surge and thermal sensors. The control panel must also be tested and approved to meet the relevant industry standards.

The 9129563500 circuit breaker is designed to be easy to install and operate. It can be easily integrated into existing electrical networks and it is designed to provide reliable protection for both personnel and equipment. It is an essential component in any electrical system, and it is important to ensure that it is installed and maintained properly in order to ensure safe and reliable operation.

The specific data is subject to PDF, and the above content is for reference