91MCE2-P3B

Snap action, limit switches are highly used in industrial and commercial applications as a means of safely controlling electrical current. The main purpose of these switches is to control current for long distances, frequently control current running through sensitive electrical components, or simply to cancel or limit the current in the event of a malfunction. The 91MCE2-P3B snap action, limit switch is a one of many varieties of snap action, limit switches providing safety and accuracy in a number of industrial and commercial applications.

The 91MCE2-P3B snap action, limit switch is made of a metal contact block and can be operated manually or electrically. Each manual switch will have an ON/OFF switch to power up or down. It is designed with a metal contact block that opens to control the electricity by connecting together two electrical contact points. This type of switch has a metal strip which is connected to a spring loaded lever arm. When the lever arm is pressed, the metal strip slides between the contact points, thus connecting the two points and allowing a current to pass through.

The 91MCE2-P3B snap action, limit switch can be used in a variety of applications from automation process control, safety and motor control systems, household appliances, vehicle control, automated door and gate control, lighting control, electronic devices, and for a whole host of other uses. It is used in applications that require a precise level of control as the switch will only activate when the lever arm is pushed to the appropriate point; meaning that the switch does not become active until the level arm is manually or electrically operated.

The 91MCE2-P3B snap action, limit switch is also used in applications where a precise amount of current is required. The current that the switch can handle will depend on the design and make of the switch, but will usually be anywhere between 1.2 and 3.3 Amp. The metal contacts of the switch will also be designed to hold up to 40,000 operations before failure.

When the lever arm of a 91MCE2-P3B snap action, limit switch is pressed, the switch will open and a current will be allowed to flow through. The current will flow in a specific direction which will be marked on the switch\'s contact block. The switch contact block should also be marked with the electrical current, either in volts or amps, that the switch can handle. The switch can then be mounted in any suitable type of enclosure to protect it from physical or environmental damage.

When the lever arm is released, it will rapidly snap back into its original position, thus breaking the current path and isolating the power. The 91MCE2-P3B snap action, limit switch is the perfect choice for a number of applications as it offers both accuracy and reliability. The switch can be used in many industries, from automotive and engineering to electrical and electronics, to control current and protect sensitive components.