9230-14-RC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are an important component of most electronic circuits used for signal processing, filtering, and electrical power distribution. These types of inductors have been used for decades for many applications including in radio frequency (RF) and power supply components. The 9230-14-RC inductor is a type of fixed inductor widely used for various purposes, namely, to built filters, in circuit decoupling, and for compensating for signal path changes.

The 9230-14-RC inductor consists of a ferrite core, a bobbin, and two copper windings. The core material is a ferrite powder with a dielectric constant greater than 10. The bobbin is made of a high permeability core material that helps reduce losses due to eddy currents and improve the inductance value. The two copper windings are wound around the bobbin, and the inductance value is obtained by varying the number of turns.

The 9230-14-RC inductor is an inductor with a high self-resonant frequency, typically over 200MHz. This enables it to be used in high frequency applications such as those found in radio frequency (RF) signals. It also has the ability to reduce signal reflection coefficient, resulting in better signal transmission. Additionally, the 9230-14-RC inductor has good temperature stability and excellent common-mode rejection, which makes it suitable for use in systems with high noise levels.

The 9230-14-RC inductor is most commonly used for building band-pass and low-pass filters, as well as for damping high-frequency signals. It can also be used to reduce common mode noise in digital circuits, as well as for decoupling between a power rail and a microcontroller. Its widely used in applications such as RF amplifiers, video amplifiers, analog-to-digital converters (ADCs), and digital-to-analog converters (DACs).

The basic working principle of the 9230-14-RC inductor is based on Faraday’s law. When an alternating current (AC) passes through the bobbin, magnetic flux is produced, which in turn induces an electromotive force (EMF) in the windings causing inductance. This inductance is then used to separate the AC input signals at different frequencies. The inductance of the coil can be controlled properties of the flux created, such as by adjusting the number of turns of the coil, the dimensions of the core, and the material of the core.

The 9230-14-RC inductor is a fixed type of inductor, which means that once its components are set and the inductance value is determined, it will not change. This makes it ideal for applications that require precise frequencies, as its inductance will remain constant over time. Its high self-resonant frequency and good temperature stability also make it an ideal choice for applications such as filters, decoupling, and damping.

The specific data is subject to PDF, and the above content is for reference