924717-10-02-EU Datasheet/PDFThe rectangular connectors 924717-10-02-EU are widely used in the electronics industry, due to their small size, low weight, and ease of integration. Headers are typically used in applications where a large number of signals need to be sent over a limited number of pins. By using a header, it’s possible to create a large number of connections without having to use an excessive number of wires.
Headers are designed to mate with receptacles and can be either 2-way or 3-way. The 924717-10-02-EU type are specifically designed for 2-way mating. When mating with a connector, the pins on the header enter the opening in the receptacle and a spring-loaded latch locks the two together. This design ensures that the connections are both secure and reliable.
The 924717-10-02-EU type is a type of male pin connector, which consists of a pin that is connected to the PCB. The pin then protrudes through the PCB and makes contact with the receptacle or plug. The contact between the male pin and the plug creates the connection that is needed for the signal to be transmitted. The male pin is typically made of metal or gold and is designed to provide a long life span and excellent electrical performance.
The 924717-10-02-EU connection is also available in standard configurations that are designed to meet specific industry standards, such as IEC 60512 and MIL-R-3100. The pins can be crimped or soldered to the board, and the receptacles can be soldered or pressed into the board. The pins also come in various lengths, such as short, mid, and long, to accommodate different types of applications.
The 924717-10-02-EU type is used in a variety of applications, such as computer and consumer electronics, telecommunications, automotive, and industrial applications. In these applications, the pin is typically used to transfer data, power, and/or signals from one point to another. As with any connector, proper installation and maintenance are essential for its long-term reliability and operational capability.