92J68RE

Series:	90
Packaging:	Bulk
Part Status:	Active
Resistance:	68 Ohms
Tolerance:	±5%
Power (Watts):	2.25W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.220" Dia x 0.406" L (5.60mm x 10.30mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistor

Through hole resistors are one of the most commonly used electrical component in electronic circuits. They are a type of resistor that consists of two terminal leads that protrude out of the bottom of the component. Resistance values are typically marked on the body of the resistor and are indicated with colored bands or numerical codes. Through-hole resistors are easy to identify and have a wide range of applications.

How Resistors Work

Resistors control the flow of electric current in a circuit. They have a property called resistance that is measured in ohms. This resistance value will determine how much current can flow through a circuit. When a voltage is applied across the two terminals of a resistor, current is limited and dissipated as heat. Through hole resistors are designed to dissipate heat efficiently and not to exceed their rating.

92J68RE Application Field and Working Principle

The 92J68RE through hole resistor is commonly used in power management. It is a high power, high voltage resistor that is designed to reduce the current or voltage in various circuits. The 92J68RE has a power rating of 10 watts and is constructed with an isolation cover to provide protection against dust and other environmental hazards. Its resistance value can range from 0.1 ​ohms to 10 ​ohms.The working principle of the resistor is same as any other. A voltage is applied to the two terminals and the current is limited by its resistance value. The higher the resistance value, the lower the current that can flow. The 92J68RE also has two additional terminals that allow for two power sources to be connected. This allows for the current to be distributed between the two circuits and limits the amount of current that can flow.

Advantages of Through Hole Resistors

Through hole resistors have a number of advantages over other types of resistive components. First, they typically have a greater power handling capacity than other types of resistors. Second, they are much easier to replace since they are also easier to identify. Through hole resistors also have better performance and are more durable thanks to their robust construction. Finally, they are much easier to install as they have the ability to solder directly to a board.

Conclusion

Through hole resistors are a reliable, cost-effective, and versatile type of resistive component. They are widely used in a variety of power management applications and have a wide range of resistive values. The 92J68RE is a high power resistor with two extra terminals that can be used to allow two power sources to be connected. Through hole resistors offer a number of advantages for use in electronic circuits, including their robust construction, ease of installation, and power handling capacity.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description