93C76C/S15K

The 93C76C/S15K is a non-volatile memory device used in a variety of applications from embedded systems to secure authentication. It operates on a silicon based CMOS process, allowing for a wide temperature range (-40°C to +125°C) and low power consumption. Its design and robust architecture also makes it reliable and dependable.The 93C76C/S15K is an EEPROM (electrically erasable programmable read-only memory) device, which is a type of non-volatile memory. Unlike EPROMs (erasable programmable read-only memory) which require ultraviolet light to erase, EEPROMs can be electrically erased without any additional equipment. The 93C76C/S15K utilizes a Serial Peripheral Interface (SPI) bus for communication.The 93C76C/S15K is an 8-pin device with a typical operating supply voltage of 5V. It has an address counter that can count up to 4096 and an on-chip status register. The 93C76C/S15K also has a built-in write protect function, which prevents the device from being unintentionally written to.There are three distinct operating modes for the 93C76C/S15K: Stand-alone, User Interface and Internal Mode. In Stand-alone mode, the device operates independently via an external pin to control write and read operations. The User Interface Mode allows a user to access the device’s memory through an interface such as a computer or controller. The Internal Mode is embedded in the device itself and allows the user to control write and read operations using the on-chip registers.The 93C76C/S15K works by writing and reading 2-bit data patterns. It has built-in error detection to ensure data accuracy. The data is stored in an array of 4096 cells, with each cell comprising of four bits (two address bits, two data bits). The data can be written to or read from the memory array by issuing commands to the device over the SPI bus.The 93C76C/S15K is used in a wide range of applications, from data encryption and secure authentication to embedded system control and monitoring. The device’s wide temperature range and low power consumption make it ideal for use in applications that require reliable and dependable operation in harsh environments.