93J910

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most common components found in electronics, and the 93J910 is no exception. This resistor is designed with a through-hole package, with two pins, one connected to the resistors’ positive lead and the other connected to the negative lead, allowing for quick and easy installation. The 93J910 is a thick film resistor, meaning that the resistor’s value and tolerance is established by the thickness of the resistive layers in the ceramic, rather than by using coils of wire like a wire-wound resistor.

The 93J910 has many applications, such as current limiting, noise reduction, voltage division, voltage regulation and power supplies. This resistor is suitable for light load applications that require a high-stability resistor. It is also used in audio applications, such as filter circuits and amplifiers, due to its high accuracy and high frequency response. It is also popular in automotive electronics.

The 93J910 resistor is particularly popular for its high accuracy. It is tolerant to temperatures from -55 °C to +125 °C and has a low temperature coefficient of resistance. It also has a high power rating, with tolerances as tight as +/-0.1% and a maximum operating voltage of 250 volts.

The working principle behind the 93J910 Through Hole Resistor is based on Ohm’s law. Ohm’s Law states that the current in a circuit is directly proportional to the voltage across the circuit. The equation is expressed as I=V/R, where I is the current, V is the voltage, and R is the resistance. The resistor in a circuit will limit the current, which is measured in amperes, to the desired level. The voltage across a resistor depends on its value and the current running through it. As the voltage increases, the current increases, causing more power to be dissipated through the resistor.

The 93J910 Through Hole Resistor is constructed of a body of a resistive element made of a metal alloy, surrounded by a protective layer of material. The protective layer is made of ceramic and provides the insulation needed to protect the resistor from damage due to overvoltage. The resistive element is exposed at the inner layer, which is what determines the resistor’s value. The resistance value is the ratio of the voltage across the resistor to the current through the resistor.

The 93J910 is a versatile resistor that is suitable for a variety of applications. It is robust and reliable, with a wide temperature range and tolerance rating. Its easy installation and high accuracy make it a great choice for various electronics projects. It is sure to meet the requirements for many applications, providing consistent and reliable operation.

The specific data is subject to PDF, and the above content is for reference