9401670000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A TVS - Varistors, MOVs is a device which is designed to protect voltage sensitive electronics from damage caused by electrical overstress such as transient surges. This product range includes both varistors and metal oxide varistors (MOVs) which are both commonly referred to as TVSs (Transient Voltage Surge Suppressors). In this article, we will be focusing on the 9401670000 application field and working principle.

Varistors are widely used in electronic circuits where overvoltage or overvoltage transients are a potential problem. Varistors, also referred to as Metal Oxide Varistors (MOVs), are devices that act as a electrical conductor when the voltage applied to them reaches a certain level. This level is referred to as the breakdown voltage and is the point at which the varistor begins to conduct. When the voltage applied to the varistor exceeds the breakdown voltage, the varistor will begin to pass current, thus protecting the circuit from further damage.

Varistors are usually composed of two plates, one being the anode and one being the cathode. In between these two plates are buried sintered metal oxide compounds that form a varistor. When a varistor is subjected to voltages below its breakdown voltage, most of the current will pass through the oxide layer and be dissipated as heat. However, when the voltage applied reaches the varistor\'s breakdown voltage, the oxide layer begins to break down and act as a conductor. This causes a large current to flow through the varistor, resulting in a rapid drop in voltage.

The 9401670000 is an ideal device for applications which require surge protection. It has a ratings of up to 150V and 440V respectively, allowing it to be used in a wide range of applications. The device also has a low capacitance rating which helps reduce the risk of electrical overstress. Furthermore, the device has a rapid response time which enables it to react quickly to voltage changes.

In terms of working principle, the 9401670000 operates by limiting the amount of voltage that can enter or leave the protected circuit. The device is designed such that once the voltage surpasses a preset level, the device will reduce the voltage by passing current through its diode. When this happens, the excess voltage will dissipate through the varistor, providing the desired protection from electrical overstress.

In summary, the 9401670000 is a versatile device which provides surge protection for a wide range of applications. It has a ratings of up to 150V and 440V respectively, a low capacitance rating and a rapid response time. In terms of its working principle, the device eliminates excess voltages by passing current through its diode when the voltage surpasses a preset level, thus providing effective surge protection.

The specific data is subject to PDF, and the above content is for reference